Champion Cooler Corp.
Champion Cooler Corp. 310085 Aspen Pad 32-3/4"x36-1/4" PK4
$18.99
0.00022938BTC
In stock
Unique-Bargains
Unique-Bargains Copper Round Tube Pipe 8mm OD x 5mm ID 500mm
Seamless 8 mm OD copper tube, 500 mm long, suited to craft, hobby or plumbing work
- Seamless construction suits craft and hobby projects
- 8 mm OD × 5 mm ID × 500 mm long
- Easily bent around obstructions for fewer joints
- UV-resistant copper endures in exposed locations
- Non-inflammable material emits no toxic gases in fire
Copper tube for craft and hobby use
This seamless copper tube has an 8 mm outside diameter and a 5 mm inside diameter. It is supplied in a 500 mm length and is intended for handle lanyard tubes, mosaic pin making and similar craft or hobby projects. The material can be bent around obstructions, reducing the need for joints and cutting installation time. Its copper construction resists ultraviolet rays and does not produce toxic gases in a fire.
Suitable for small-bore tubing projects.
Builders and hobbyists who need a short length of narrow copper tube for decorative or low-pressure work will find this size convenient. It is not suited to applications that require a larger bore, thicker wall or pressure-rated plumbing pipe. Buyers looking for extended runs should note the single 500 mm piece and plan joins accordingly. Anyone needing certified gas or water supply tubing should look at approved alternatives.
Check the 8 mm OD and 5 mm ID against your fittings
Verify that the 8 mm outside diameter and 5 mm inside diameter match the ferrules, compression fittings or drill sizes you intend to use. Confirm that a 500 mm length is sufficient for your layout before ordering multiple pieces. Ensure your tools can cut and deburr copper cleanly without crushing the thin wall. No additional components are included in the package.
Highlights
- Seamless construction suits craft and hobby projects
- 8 mm OD × 5 mm ID × 500 mm long
- Easily bent around obstructions for fewer joints
- UV-resistant copper endures in exposed locations
- Non-inflammable material emits no toxic gases in fire
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
What tools are needed to bend the 8 mm outside-diameter copper tube for a lanyard handle?
The seamless copper tube can be bent by hand or with a small tube bender; its 500 mm length gives enough material to form curves without kinking.
Will the 5 mm inside diameter accept a standard paracord core for a lanyard?
The 5 mm bore fits common 4 mm paracord with room for a snug friction fit, making it suitable for handle or lanyard projects.
How can I verify the tube is the correct 500 mm length after unpacking?
Measure the straight tube end-to-end with a ruler or tape; it should read 500 mm or 19.5 inches as specified.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
