We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled copper refrigeration tubing, 6.5 ft length, copper tone finish

Unique-Bargains

Unique-Bargains Copper Refrigeration Tubing 9/64" OD 7/64" ID 6.5 Ft

SKU CH-S5WP-NZ78X

Soft copper tubing for refrigerant lines, 9/64" OD × 7/64" ID, 6.5 ft coil

  • TypeElectrical Boxes
  • 9/64" OD and 7/64" ID fit compact refrigeration lines
  • 5 ft coil provides ample length for routing
  • Fine ductility allows easy bending without kinking
  • Corrosion resistant copper suits refrigerant and oil circuits
  • Low melting point enables straightforward welding and brazing

Refrigeration Tubing Dimensions

This soft copper tubing measures 9/64" outside diameter and 7/64" inside diameter across a 6.5 Ft coil. It suits HVAC technicians and DIYers repairing refrigerator, freezer or air-conditioner circuits. The material also serves as an automobile oil line where small-bore copper is specified.

Upgrade From Worn Lines

Replace cracked, kinked or corroded original tubing when a leak appears or during a full system recharge. The jump is worth it when the existing line cannot hold pressure or when contamination requires a clean copper path. It does not suit installations that demand larger bore sizes or pre-flared ends.

Simple Coil Installation

The 6.5 Ft length unrolls for cutting and bending by hand or with a standard tubing bender. Low melting point and high strength allow straightforward brazing or flaring. Take care to deburr cuts cleanly and avoid sharp kinks that restrict flow; improper flares are the most common cause of leaks.

Highlights

  • 9/64" OD and 7/64" ID fit compact refrigeration lines
  • 5 ft coil provides ample length for routing
  • Fine ductility allows easy bending without kinking
  • Corrosion resistant copper suits refrigerant and oil circuits
  • Low melting point enables straightforward welding and brazing

Specifications

BrandUnique Bargains
TypeElectrical Boxes

Questions about this item

What outer diameter and inner diameter must my fittings match for this 9/64 in OD copper tubing?

The tubing has a 9/64 in outer diameter and a 7/64 in inner diameter, so select flare or compression fittings sized for those dimensions.

How do I flare the 9/64 in OD soft copper coil without cracking it?

Cut square with a tubing cutter, deburr inside and out, slide the flare nut on first, then use a flaring tool matched to the 9/64 in OD; the soft copper work-hardens, so apply steady pressure.

When should I replace the 6.5 ft copper refrigeration line?

Replace if you see green corrosion, kinks that restrict flow, or any crack at a flare joint; the 83 g coil has no service interval, so inspect during system service.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.