We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper foil tape roll 10mm wide 20m length double sided conductive adhesive

Unique-Bargains

Unique-Bargains Copper Foil Tape 10mm 20m Double Sided Conductive

SKU CH-5EZT-4JYZK

Double-sided conductive copper foil tape, 10 mm wide and 20 m long, shields against EMI, EMF and RFI while resisting temperatures up to 150 °C

  • Blocks EMI, EMF and RFI with double-sided conductive copper foil
  • Self-adhesive backing sticks directly to surfaces without extra adhesive
  • Withstands long-term 80 °C and short-term 150 °C heat exposure
  • 20 m roll at 10 mm wide and 0.06 mm thick for precise shielding
  • Suits PCB plating masking, guitar shielding, crafts and general electronics assembly

Shielding Tape for EMI and RFI

This 10mm wide copper foil tape provides double-sided conductive adhesion for electromagnetic and radio-frequency interference shielding. Each roll supplies 20 metres of 0.06mm thick material rated for long-term exposure up to 80 and short-term peaks of 150. The self-adhesive backing sticks directly to surfaces without extra glue, making it practical for circuit-board masking, guitar cavity shielding and general electronic assembly.

Build Integration and Clearance

The thin 0.06mm profile adds negligible bulk inside tight enclosures or between components, so it fits around existing wiring and board layouts without redesign. Double-sided conductivity lets you create a continuous ground path simply by overlapping strips, freeing you from soldering jumper wires for shielding continuity. The 10mm width covers narrow traces and seams efficiently, while the 20m roll length supports multiple projects from a single spool.

Upgrade Path and Limitations

Builders replacing single-sided foil or fabric tape gain two-way conduction without stacking layers, reducing thickness and labour. The temperature range suits most hobbyist soldering and conformal-coating cycles, but the tape is not intended for high-current power distribution or structural reinforcement. Users needing wider coverage, thicker foil or a non-conductive masking option will need a different product.

Highlights

  • Blocks EMI, EMF and RFI with double-sided conductive copper foil
  • Self-adhesive backing sticks directly to surfaces without extra adhesive
  • Withstands long-term 80 °C and short-term 150 °C heat exposure
  • 20 m roll at 10 mm wide and 0.06 mm thick for precise shielding
  • Suits PCB plating masking, guitar shielding, crafts and general electronics assembly

Specifications

BrandUnique Bargains

Questions about this item

How long can the 0.06 mm thick tape withstand 150 °C before it degrades?

The manufacturer rates it for short-term exposure up to 150 °C; long-term use should stay at or below 80 °C.

Does the double-sided conductive adhesive create noticeable heat during continuous EMI shielding?

The tape is a passive copper foil with conductive adhesive; it generates no heat of its own and adds negligible thermal resistance.

What surface preparation is needed so the self-adhesive copper foil bonds reliably?

Clean the target area of dust, oil and moisture, then press the tape firmly into place — no extra adhesive or primer is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.