We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular C14 panel-mount inlet with three straight pins and a hinged cover

Unique-Bargains

Unique-Bargains C14 Straight Blade Plug AC 250V 10A 3 Pin with Cover

SKU CH-JTEA-WNYE6

A panel-mount IEC C14 inlet rated 250 V AC at 10 A with straight copper pins, 40 mm mounting centres, 3.5 mm mounting holes, and a protective cover

  • TypeIEC Pin & Sleeve Plugs, Connectors & Interlocks
  • C14 connector fits standard IEC power inlets
  • Rated for AC 250V at 10 amps continuous
  • Copper contacts ensure reliable electrical conductivity
  • Straight pin orientation simplifies panel mounting
  • Protective cover shields pins when not in use

C14 Panel-Mount Plug for AC 250V 10A

This C14 straight-blade plug provides a panel-mount power inlet rated at AC 250V and 10A. It uses three copper pins in a straight orientation and includes a protective cover. The unit suits equipment that requires a standard IEC C14 connection.

Suits chassis builds needing a 40mm hole spacing

Builders fitting a power inlet into a 40mm mounting-hole pattern with 3.5mm diameter holes will find this part compatible. It is not for applications that demand a different pin count, a right-angle orientation or a higher current rating than 10A.

Check panel cut-out and wiring before ordering

Verify that your panel can accommodate the 50x30mm overall footprint and the 40mm centre-to-centre mounting holes. Confirm the 3.5mm hole diameter matches your hardware and that your supply wiring is rated for AC 250V at 10A.

Highlights

  • C14 connector fits standard IEC power inlets
  • Rated for AC 250V at 10 amps continuous
  • Copper contacts ensure reliable electrical conductivity
  • Straight pin orientation simplifies panel mounting
  • Protective cover shields pins when not in use

Specifications

BrandUnique Bargains
TypeIEC Pin & Sleeve Plugs, Connectors & Interlocks

Questions about this item

What panel cut-out dimensions and screw spacing does this C14 inlet need for a secure fit?

The inlet requires a 40mm centre-to-centre screw spacing with 3.5mm diameter mounting holes, and an overall body size of 50x30x22mm.

Will this 10A-rated C14 inlet safely replace an older 6A IEC inlet on the same equipment?

Yes, the higher 10A rating at 250V AC provides additional margin, but the equipment's own fuse and wiring must still be rated for the load.

How can I verify the inlet is correctly wired and making good contact after installation?

With power off, check for continuity between each pin and its terminal, then under load confirm the equipment powers normally and the inlet body stays cool.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.