We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two brass hose fittings, M10x1 male to 6mm barbed, gold tone finish

Unique-Bargains

Unique-Bargains Brass Fitting M10x1 Male to 6mm Barb 2pcs

SKU CH-DCB3-GDFXQ

Brass M10x1 male-to-6 mm barb fittings connect hose to metric ports in a two-piece pack

  • TypeHose Fittings
  • Connects 6 mm hose to M10×1 female ports with one-piece brass construction
  • Barbed stem and clamp create a leak-tight seal on flexible or semi-rigid tubing
  • Brass body resists corrosion and handles high-temperature fluids such as fuel and oil
  • Compact 33 mm overall length fits tight engine-bay or plumbing spaces
  • 10 mm hex allows quick installation with a standard spanner

Brass fitting for metric lines

The Unique-Bargains brass connector joins 6 mm internal-diameter hose to an M10×1 male thread. It suits air, water, fuel, oil and inert-gas circuits where a quick, positive seal is required. Two fittings are supplied per pack. Builders who need a different thread pitch or a larger barb diameter should look elsewhere.

Thermals, noise and power

Brass construction resists corrosion and retains ductility at elevated temperatures, so the fitting does not degrade or leak when fluid temperature rises. Passivation on the surface adds further protection against chemical attack. The passive metal joint adds no vibration or electrical draw to the system.

Build and daily use

Each piece measures 33 mm overall with a 10 mm hex for spanner tightening and a 20 mm barb length that accepts a clamp or ferrule. The 9 mm thread engages standard M10×1 female ports. One-piece barbed design eliminates potential leak paths at a joint. Clamps, crimp sleeves or ferrules are not included and must be sourced separately.

Highlights

  • Connects 6 mm hose to M10×1 female ports with one-piece brass construction
  • Barbed stem and clamp create a leak-tight seal on flexible or semi-rigid tubing
  • Brass body resists corrosion and handles high-temperature fluids such as fuel and oil
  • Compact 33 mm overall length fits tight engine-bay or plumbing spaces
  • 10 mm hex allows quick installation with a standard spanner

Specifications

TypeHose Fittings
BrandUnique Bargains

Questions about this item

How do I install the M10x1 male thread and what step is often missed?

Screw the M10x1 male thread into the matching female port using a 10mm spanner on the hex, then push the 6mm hose onto the 20mm barb and secure it with a clamp — the step people miss is fitting that clamp or ferrule, because the barb alone will not hold under pressure.

What maintenance or replacement will these brass fittings need later?

Inspect the barb and threads for corrosion or deformation whenever the hose is removed; replace the fitting if the passivated brass surface shows pitting or the 9mm thread length no longer seals, and always fit a new hose clamp when reassembling.

What limit appears first under sustained pressure or vibration?

The 20mm barb-to-hose joint secured only by a clamp is the first point that can leak or blow off if the clamp loosens, so check clamp tightness regularly during prolonged use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.