We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black plastic 9012 HIR2 LED headlight adapter bases with clips and O-rings

Unique-Bargains

Unique-Bargains 9012 HIR2 LED Headlight Adapter Base 2pcs Black

SKU CH-9JEN-CGD5S

Adapter bases secure 9012 HIR2 LED bulbs in halogen housings without socket damage

  • QualityAftermarket OEM
  • Enables 9012 HIR2 halogen-to-LED upgrades without damaging original sockets
  • Securely holds aftermarket LED bulbs in factory headlamp housing
  • Plugs directly into stock socket with no modification required
  • Includes two adapter bases, two O-rings and two screws for complete fitment
  • Compact 36 x 35 x 10 mm plastic retainer with 15.5 mm centre hole

Universal 9012 HIR2 Adapter Base

This pair of plastic adapter bases lets owners of halogen 9012 HIR2 headlamps fit aftermarket LED bulbs without altering the original housing. Each base measures 36 by 35 by 10 mm and includes a 15.5 mm centre hole, two O-rings and two screws for a complete installation kit.

Halogen-only socket retainer

The black plastic retainer clips straight into the factory headlight socket so the LED bulb sits firmly and the original wiring stays intact. Because the clip geometry varies between vehicle models, the centre aligns but the outer tabs may need slight adjustment or a gentle squeeze with pliers; professional fitting is advised to avoid stressing the plastic.

Limits of the 9012 HIR2 interface

The adapter works only with halogen-spec 9012 HIR2 housings and cannot be used on factory LED or HID units. It adds no electrical conversion — just mechanical retention — so the LED bulb must already match the vehicle's voltage and CAN-bus requirements. Buyers who need a different bulb base or a built-in driver will need a different solution.

Highlights

  • Enables 9012 HIR2 halogen-to-LED upgrades without damaging original sockets
  • Securely holds aftermarket LED bulbs in factory headlamp housing
  • Plugs directly into stock socket with no modification required
  • Includes two adapter bases, two O-rings and two screws for complete fitment
  • Compact 36 x 35 x 10 mm plastic retainer with 15.5 mm centre hole

Specifications

BrandUnique Bargains
QualityAftermarket OEM

Questions about this item

Does the 9012 HIR2 adapter base fit the standard halogen headlamp socket?

Yes, it plugs directly into the factory 9012 HIR2 halogen housing without modification.

What are the critical dimensions I should check before ordering?

The adapter measures 36 x 35 x 10 mm overall with a 15.5 mm centre hole.

What is the trick to getting the retainer clips to lock on my vehicle?

The centre aligns universally but the side clips may need slight bending or pliers assistance to engage fully.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.