Unique-Bargains
Unique-Bargains 6 AWG 50A Quick Connect Kit Black 2pcs
A 50 A quick-disconnect kit for 6 AWG wire with polarised, silver-plated copper pins, polycarbonate housings and rubber boots
- Battery TypeBattery Converter
- Quick-disconnect power for winches and trailers with identical connector ends
- 50 A continuous current rating on 6 AWG wire
- Silver-plated copper pins ensure strong conductivity and stable voltage
- UL94 V0 housing resists flame and operates from −20 °C to 125 °C
- Rubber boot caps seal out dust, moisture and corrosion
50A Quick Connect Kit for 6 AWG Wiring
This two-piece connector kit provides a high-current quick-disconnect solution rated at 50 amps and 600 volts. It is suited for winches, trailer wiring, solar installations, power inverters and remote battery chargers. The identical housings allow either end to serve as the power or load side while the polarised design prevents reverse connection.
Polycarbonate Housing with Silver-Plated Copper Pins
Each connector uses a UL94 V0-rated polycarbonate shell that resists heat up to 125°C and a fitted rubber boot that seals out dust and moisture. The 0.22-inch inner-diameter terminal pins are copper with silver plating for low-resistance conductivity, and stainless steel springs maintain firm contact pressure during vibration. Housings of the same size and colour interlock to simplify multi-connector assemblies.
Verify Wire Gauge and Operating Limits Before
Confirm that your cables are 6 AWG (13.3 mm²) so they seat correctly in the 0.22-inch pin bore. The kit is rated for continuous operation between -20°C and 125°C and a withstanding voltage of 2200 V DC. Buyers who need a higher current rating, a different wire gauge or a connector series that mates with an existing proprietary system will find this kit unsuitable.
Highlights
- Quick-disconnect power for winches and trailers with identical connector ends
- 50 A continuous current rating on 6 AWG wire
- Silver-plated copper pins ensure strong conductivity and stable voltage
- UL94 V0 housing resists flame and operates from −20 °C to 125 °C
- Rubber boot caps seal out dust, moisture and corrosion
Specifications
| Brand | Unique Bargains |
|---|---|
| Battery Type | Battery Converter |
Questions about this item
What current does the 600 V-rated connector handle in practice?
The kit is rated for 50 A continuous current at 600 V, with a 2200 V DC withstand voltage and UL94 V-0 flammability rating.
What wire size and housing clearance does the 0.22 in terminal accept?
Terminal pins fit 6 AWG (13.3 mm²) wire; the polycarbonate housings and rubber boots are sized for that gauge and interlock only with identical size and colour units.
How are the four terminal pins crimped and seated so polarity cannot be reversed?
Strip the 6 AWG wire, crimp each pin, insert into the housing until the stainless-steel spring locks, then fit the rubber boot; the keyed housing allows only one mating orientation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



