We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five silver stainless steel rods 350mm long 2.5mm thick

Unique-Bargains

Unique-Bargains 5Pcs Stainless Steel Round Rod 350mm x 2.5mm

SKU CH-ME1X-GJVGG

Five stainless-steel rods, 350 mm long and 2.5 mm thick, totalling 60 g for RC model building

  • TypeOther Accessories
  • Stainless steel resists corrosion for long-lasting hardware use
  • 5 mm diameter fits precision mechanical transmission projects
  • 350 mm length provides ample stock for custom fabrication
  • Five rods per pack give multiple pieces for repeated builds
  • 60 g total weight keeps drone and RC assemblies light

Precision Rods for Model Builders

This set supplies five stainless steel round rods, each 350mm long and 2.5mm in diameter, weighing 60g in total. They are intended for hobbyists assembling or repairing RC models, drones and similar mechanical projects.

Suited for Small-Scale Fabrication

The slender profile suits lightweight airframes, pushrods and linkage work where minimal mass matters. Builders needing thicker shafts, longer stock or different alloys will need to source alternative material.

Consistent Stiffness Under Load

Stainless steel resists bending during repeated actuation cycles, keeping control throws predictable across extended flights. The uniform cross-section prevents weak spots that could deform under sustained vibration.

Highlights

  • Stainless steel resists corrosion for long-lasting hardware use
  • 5 mm diameter fits precision mechanical transmission projects
  • 350 mm length provides ample stock for custom fabrication
  • Five rods per pack give multiple pieces for repeated builds
  • 60 g total weight keeps drone and RC assemblies light

Specifications

BrandUnique Bargains
TypeOther Accessories

Questions about this item

What diameter drill or collet do I need to hold these 2.5 mm rods?

The rods are 2.5 mm in diameter, so choose a 2.5 mm drill bit, collet or chuck that matches that size.

Can I mix these 350 mm stainless rods with the carbon-fibre pushrods already on my RC model?

Yes — they are plain 350 mm stainless-steel rods and will work alongside any existing pushrods as long as the linkage geometry matches.

How can I confirm the five rods I received are the correct 350 mm length and 2.5 mm diameter?

Measure each rod with a vernier caliper; they should read 350 mm long and 2.5 mm across the flats.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.