We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten silver and black mini USB sockets with straight pins in a row

Unique-Bargains

Unique-Bargains 5-Pin Mini USB Socket 180° DIP 10 Pcs

SKU CH-86T1-JMY5Q

Pack of ten 180-degree DIP mini USB sockets for circuit-board soldering

  • TypeHI - Conduit & Fittings
  • 5-pin mini USB socket for mobile device connectivity
  • 180° DIP orientation simplifies PCB layout
  • 10 pieces per pack supports multiple builds
  • 13 x 8 x 4 mm footprint fits compact designs
  • Silver tone and black finish for clear identification

Component Overview

This pack contains ten 5-pin mini USB female sockets designed for through-hole mounting on printed circuit boards. Each connector measures 13 x 8 x 4 mm and weighs approximately 7 grams. The silver and black housings combine plastic, metal and electrical contacts in a single component.

Design & Mounting

The 180-degree DIP orientation places pins in a straight line for standard wave or hand soldering. This footprint replaces right-angle or surface-mount variants when board layout demands vertical insertion. The change is worthwhile when enclosure height permits a straight connector and assembly prefers through-hole reliability.

Integration Notes

Each socket accepts a standard 5-pin mini USB plug used in mobile phones, MP3, MP4 and MP5 players and similar digital devices. The through-hole pins require plated holes and solder on the opposite side of the board. The pack of ten supports prototyping or small production runs without additional sourcing.

Highlights

  • 5-pin mini USB socket for mobile device connectivity
  • 180° DIP orientation simplifies PCB layout
  • 10 pieces per pack supports multiple builds
  • 13 x 8 x 4 mm footprint fits compact designs
  • Silver tone and black finish for clear identification

Specifications

BrandUnique Bargains
TypeHI - Conduit & Fittings

Questions about this item

Will the 13 x 8 x 4 mm footprint fit my PCB layout?

The connector body measures 13 mm long, 8 mm wide and 4 mm high, so compare those dimensions with your board outline and keep-out zones before ordering.

How do I solder the 180° DIP pins without bridging?

Align the five through-hole pins with the PCB pads, tack one corner pin first, check the 180° straight orientation, then solder the remaining pins using a fine tip and minimal solder to avoid bridges.

When should I replace one of the 10 sockets in the pack?

Replace a socket if the plastic housing cracks, the metal contacts bend or oxidise, or the connector no longer grips a mini-USB plug firmly after repeated insertions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.