We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five beige straight ATX PCB power connectors with silver pins

Unique-Bargains

Unique-Bargains 5 Pcs Beige 4 Pin Straight ATX PCB Power Connector Adapter

SKU CH-YJNR-MPXE6

Pack of five beige straight 4-pin ATX PCB power connectors for mainboard PSU wiring

  • TypeHI - Conduit & Fittings
  • Five connectors per pack for multiple builds
  • Straight 4-pin layout fits ATX PCB headers
  • Beige plastic with silver-tone metal contacts
  • Compact 1.6 x 1 x 1 cm footprint
  • Light 8 g weight adds minimal mass

Five-pack ATX PCB power connectors

This pack supplies five beige straight-plug ATX connectors for PCB-mount power wiring on motherboards or PSUs. Each unit combines a plastic housing with metal contacts in a compact 1.6 x 1 x 1 cm form factor. The connectors arrive new and ready for soldering onto custom boards or repair jobs. Builders assembling low-profile power interfaces will find the quantity convenient.

Straight plug orientation and mixed materials

The straight plug profile keeps the cable exit in line with the board, easing routing in tight enclosures. Plastic bodies and silver-tone metal pins resist vibration while maintaining reliable contact through repeated mating cycles. At only 8 g for the full set, the adapters add negligible mass to dense layouts. No locking latch is described, so retention relies on friction fit alone.

Replaces damaged or missing board-mount ATX headers

Use these to restore a burnt or lifted factory header without replacing the entire PCB. They also serve prototype builds where a standard ATX plug must be hard-wired to a custom power distribution board. The jump is worth it when the original connector is unsalvageable or when a one-off design needs a proven ATX footprint. Buyers needing right-angle or locking variants will need a different part.

Highlights

  • Five connectors per pack for multiple builds
  • Straight 4-pin layout fits ATX PCB headers
  • Beige plastic with silver-tone metal contacts
  • Compact 1.6 x 1 x 1 cm footprint
  • Light 8 g weight adds minimal mass

Specifications

BrandUnique Bargains
TypeHI - Conduit & Fittings

Questions about this item

What ATX power standard does the 4-pin straight connector support and what current does it carry?

The connector follows the standard ATX 4-pin power layout used for CPU auxiliary power on desktop mainboards; the current limit is set by the ATX specification and the wire gauge you solder to the pins.

What are the exact dimensions and pin spacing so I can confirm it fits my PCB layout?

Each unit measures 1.6 cm long, 1 cm wide and 1 cm high with a 0.4 in pin pitch; the beige plastic body and silver-tone pins match the listed 0.6 in by 0.4 in footprint.

How do I solder these connectors to the board without melting the plastic housing?

Pre-tin the PCB pads, insert the straight pins, then apply the iron to each pin for no more than 3 seconds using a fine tip; let the joint cool before moving to the next pin to avoid softening the beige housing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.