Unique-Bargains
Unique-Bargains 4Pcs RJ11 6P4C Male to 2 Female Telephone Splitter Adapter
Four-pack of RJ11 splitters turns one phone jack into two for connecting telephones, fax machines, modems or answering machines
- Connect two devices from one jack with the RJ11 male-to-dual-female splitter
- Four adapters included so multiple rooms or workstations stay ready
- Compact 2.6 x 2.1 x 2.6 cm body fits behind furniture without blocking outlets
- Light 35 g nylon construction adds negligible strain on wall sockets
- 13 cm pigtail gives slack for tidy routing around skirting boards
Four-port telephone splitter
This pack contains four RJ11 6P4C adapters that turn one wall jack into two sockets. Each unit lets you connect two devices such as phones, fax machines or modems from a single line. The compact nylon housings measure 2.6 x 2.1 x 2.6 cm and weigh 35 g total. A 13 cm lead gives a little extra reach behind furniture.
Passive wiring with no power draw
The adapters are purely passive so they add no electrical load and generate no heat. No fan or active circuitry means silent operation and zero power consumption. Signal passes straight through the gold-plated contacts without amplification or conversion. The short 13 cm cable keeps resistance low for typical voice or low-speed data use.
Stable connection for two simultaneous devices
Under continuous use the splitter simply maintains the physical connection between the line and both attached devices. Performance depends entirely on the line quality and the equipment plugged in. There is no active component to overheat, throttle or degrade over time, so behaviour remains consistent whether the call lasts minutes or hours.
Highlights
- Connect two devices from one jack with the RJ11 male-to-dual-female splitter
- Four adapters included so multiple rooms or workstations stay ready
- Compact 2.6 x 2.1 x 2.6 cm body fits behind furniture without blocking outlets
- Light 35 g nylon construction adds negligible strain on wall sockets
- 13 cm pigtail gives slack for tidy routing around skirting boards
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
How do I install the 13 cm RJ11 splitter so both female ports work?
Plug the single male RJ11 connector into the wall jack until it clicks, then insert each device cable into the two female ports until they latch; the step often missed is not pushing the male plug in fully, leaving one port dead.
What maintenance or replacement will the nylon-bodied RJ11 splitter need over time?
The nylon housing and gold-plated contacts are passive, so no scheduled maintenance is required; replace the unit only if the 13 cm cable sheath frays or a port stops latching securely.
What is the first limit I will hit when running two devices through the 35 g splitter continuously?
The 13 cm cable length and single RJ11 male interface limit total loop resistance and physical reach before signal quality degrades on long runs.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



