We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Translucent food-grade silicone hose, 1 metre length, 4 mm inner by 6 mm outer diameter

Unique-Bargains

Unique-Bargains 4mm x 6mm Food Grade Silicone Hose 1M

SKU CH-KBAJ-70F6Z

Translucent food-grade silicone hose for pump and transfer use, withstands 200 °C intermittent heat

  • Food-grade silicone safe for potable water and beverage lines
  • Withstands 200 °C intermittent heat for hot-fluid transfer
  • 4 mm inner and 6 mm outer diameter for precise fit
  • Translucent wall lets you monitor flow and detect blockages
  • Odourless, tasteless and inert — no flavour contamination

Food-Grade Silicone Hose for Pumps

This translucent silicone hose is made for pump and transfer tasks in food, beverage, pharmaceutical and laboratory settings. The material is odourless, tasteless and inert, so it does not contaminate the fluids it carries. It suits water dispensers, coffee makers, water heaters and similar appliances. Builders needing higher pressure ratings or larger diameters should look elsewhere.

4 mm Inner Diameter with 1 Metre Length

The tube has a 4 mm inner diameter and a 6 mm outer diameter, giving a 1 mm wall thickness. One metre of length provides enough reach for typical countertop or bench-top connections. The bore handles water, air and low-viscosity liquids in dispensing equipment. Systems that require greater flow volume or longer continuous runs will exceed the capacity of this size.

Heat Resistance to 200 °C Intermittent

The silicone withstands temperatures up to 200 °C for intermittent exposure, making it suitable for hot-water lines and steam paths. It remains flexible in normal use and shows low odour and oil resistance. The lightweight 20 g coil adds minimal load to fittings. Continuous high-temperature service beyond the rated limit is not supported.

Highlights

  • Food-grade silicone safe for potable water and beverage lines
  • Withstands 200 °C intermittent heat for hot-fluid transfer
  • 4 mm inner and 6 mm outer diameter for precise fit
  • Translucent wall lets you monitor flow and detect blockages
  • Odourless, tasteless and inert — no flavour contamination

Specifications

BrandUnique Bargains

Questions about this item

Will the 4mm inner diameter fit the pump barbs I already use?

The tube has a 4mm inner diameter and 6mm outer diameter, so it will slide onto barbs sized for 4mm ID hose.

How can I confirm the hose handles the heat in my coffee-machine line?

The silicone is rated for intermittent exposure up to 200 °C, so running hot water or steam through it will show no softening or odor.

Does the 1 m length come pre-cut or do I need to buy cutting tools?

The package contains one 1 m translucent silicone tube weighing 20 g; no fittings or tools are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.