Unique-Bargains
Unique-Bargains 4 Pin 5m 16.4ft Backup Camera Extension Cable
A 5 m four-pin extension cable connects backup or rear-view cameras with a simple plug-and-play fit
- 5 m length reaches rear-mounted cameras on most vehicles
- Plug-and-play 4-pin connectors install without tools
- Male 6 mm and female 4.3 mm plugs fit common dash-cam ports
- PVC jacket resists abrasion and weather for longer service
- DC 12 V rating matches standard vehicle electrical systems
Extension length and pin count
This five-metre 16.4-foot cable carries a four-pin connection between a vehicle's backup camera and its display. The male connector measures 6mm across and the female end 4.3mm, both moulded in black PVC for durability. It is designed solely for rear-view and dash-camera systems running on 12-volt DC power.
Signal integrity over the full run
The PVC jacket protects the conductors across the entire 500-centimetre length, reducing the risk of voltage drop or interference during continuous operation. Plug-and-play installation means no splicing or tools are required, so the connection remains stable once seated. The cable is rated only for backup-camera duty, not for general power distribution.
Replacing a short or damaged factory lead
This extension replaces an original cable that is too short for a new monitor position or one that has cracked from weather exposure. The upgrade is worthwhile when the existing harness cannot reach the mounting point or when the connectors have corroded. It does not add extra pins, change voltage or support front-facing cameras.
Highlights
- 5 m length reaches rear-mounted cameras on most vehicles
- Plug-and-play 4-pin connectors install without tools
- Male 6 mm and female 4.3 mm plugs fit common dash-cam ports
- PVC jacket resists abrasion and weather for longer service
- DC 12 V rating matches standard vehicle electrical systems
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
How much power does the 12 V extension cable draw when the backup camera runs all day?
The cable itself draws no power; it simply passes the vehicle's 12 V supply to the camera, so heat and consumption depend entirely on the camera's own rating.
What connector type must my existing camera and monitor have for this 4-pin male-to-female cable to work?
Both the camera and the monitor need a 4-pin aviation-style connector — 6 mm male on the camera side and 4.3 mm female on the monitor side — otherwise the cable will not mate.
Will this 5 m PVC cable reach from a rear-mounted camera to a front dashboard monitor on my older sedan?
At 5 m or 16.4 ft the cable spans most saloon and hatchback roofs; measure your actual routing path before purchase to confirm the length is sufficient.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



