We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 4-pin backup camera extension cable, 3 metres long, PVC jacket, male and female connectors

Unique-Bargains

Unique-Bargains 4 Pin 3 Meters Backup Camera Extension Cable Car Electronics Accessory

SKU CH-EFE6-MZ7GM

A 3-metre 4-pin extension cable connects compatible backup or rear-view cameras with a simple plug-and-play fit

  • 3 m reach connects rear-view cameras across the vehicle
  • 4-pin male-to-female plugs match factory camera connectors
  • PVC jacket resists vibration and temperature swings
  • Plug-and-play design needs no tools or splicing
  • DC 12 V rating suits standard automotive electrical systems

4-Pin Backup Camera Extension Cable

This 4-pin extension cable connects a backup camera to a monitor or recording unit in a vehicle. It suits drivers who need extra reach between the rear-mounted camera and the front display. The male-to-female layout plugs directly into existing 4-pin connectors without splicing. Only buyers with a matching 4-pin camera system can use it.

Practical limits of the 4-pin 12 V interface

The cable carries DC 12 V power and video signal over a fixed 3 metre (9.84 ft) length. Connectors measure 6 mm male and 4.3 mm female diameter, so both ends must match the camera and monitor ports exactly. PVC sheathing protects the conductors, but the cable is not rated for other pin counts, voltages or outdoor exposure beyond the vehicle interior. Length cannot be adjusted or joined.

Replaces shorter factory leads or damaged cords

It upgrades a too-short original cable that prevents routing the camera to the preferred mounting point. The jump is worth it when the factory lead falls short of the monitor location or when an existing cord has worn connectors. It does not add camera functionality, increase resolution or support wireless systems. Buyers needing a different pin count, longer run or wireless link cannot use this cable.

Highlights

  • 3 m reach connects rear-view cameras across the vehicle
  • 4-pin male-to-female plugs match factory camera connectors
  • PVC jacket resists vibration and temperature swings
  • Plug-and-play design needs no tools or splicing
  • DC 12 V rating suits standard automotive electrical systems

Specifications

BrandUnique Bargains

Questions about this item

Should I choose the 3 metre or 9.84 ft length for my rear-view camera?

Both figures describe the same cable; 3 metres equals 9.84 ft, so pick the unit you prefer.

Will the 12 V rating power my camera reliably over the full 3 metre run?

Yes, the cable is rated for DC 12 V and the PVC construction keeps voltage drop low across the 300 cm length.

Does the 4-pin 6 mm male to 4.3 mm female connector match the standard aviation-style backup camera interface?

It uses a 4-pin layout with a 6 mm male plug and 4.3 mm female socket; verify your camera’s pin-out before connecting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.