We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Unique-Bargains

Unique-Bargains 4.8mm Round Recessed Pull Handle Knob Silver Tone

SKU CH-DZZV-NQXGA

A 4.8 mm recessed pull handle with 360° arc rotation for sliding or invisible doors, including eight self-tapping screws

  • TypeDoor Knob Locksets
  • Smooth 360° rotation for effortless opening and closing
  • Brushed electroplated finish resists rust and fading
  • 8 mm mount hole suits standard door thickness
  • Recessed arc pull gives comfortable grip without protruding
  • Includes eight self-tapping screws for secure open-hole installation

Silver-Tone Recessed Pull Handle for Sliding Doors

This recessed pull handle suits sliding doors, closet doors and invisible wall doors where a flush profile is preferred. The 94 x 75 mm stainless-steel body with brushed electroplated finish resists rust and fading in daily residential use. It is designed for homeowners and installers who want a low-profile latch without a visible key cylinder.

Open-Hole Mounting with 4.8 mm Screw Holes

Installation requires drilling a 4.8 mm diameter hole at a 65 mm centre distance, then fastening the eight supplied self-tapping screws. The thickened zinc-alloy body and solid latch resist deformation, but the door must be thick enough to accept the full screw length without splitting. Misaligned holes or undersized pilot holes are the most common cause of a loose fit.

Check Door Thickness and Hole Spacing Before

Verify that the door panel can accommodate a 94 x 75 mm cut-out and that the 65 mm mounting centres match existing hardware or your drilling template. The 360° rotating pull ring operates without keys, so this lock is not suitable for entries that require keyed security or for doors thinner than the screw length supplied.

Highlights

  • Smooth 360° rotation for effortless opening and closing
  • Brushed electroplated finish resists rust and fading
  • 8 mm mount hole suits standard door thickness
  • Recessed arc pull gives comfortable grip without protruding
  • Includes eight self-tapping screws for secure open-hole installation

Specifications

BrandUnique Bargains
TypeDoor Knob Locksets

Questions about this item

How do I verify the 360° pull ring rotates smoothly after installation?

Turn the recessed pull ring through a full 360° arc; it should move freely without binding and the latch should engage cleanly at each stop.

What hardware is included for the 4.8 mm mount holes spaced 65 mm apart?

The pack contains one recessed door lock and eight self-tapping screws sized for the 4.8 mm holes at 65 mm centres.

Which finish suits a brushed stainless-steel look on a 94 mm by 75 mm panel?

The silver-tone brushed electroplated finish matches the 94 x 75 mm dimensions and gives a consistent stainless-steel appearance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.