Unique-Bargains
Unique-Bargains 4.0mmx1.7mm DC Power Male Plug 10pcs
Pack of ten 4.0mm × 1.7mm DC power male plugs weighing 19 g and measuring 47 mm long
- Reliable power connection with 4.0mm x 1.7mm fit
- Pack of 10 plugs covers multiple repairs
- Lightweight 19 g total weight adds minimal bulk
- 47 mm length fits tight chassis spaces
- Black finish matches common DC equipment aesthetics
4.0mm x 1.7mm DC Power Male Plugs
This pack contains ten straight blade plugs sized at 4.0mm by 1.7mm. They are intended as direct replacements for worn or damaged DC power connectors on compatible devices. Each plug measures approximately 47mm in total length. The pack weighs 19g in total.
Suits repair jobs needing a standard 4.0mm x 1.7mm
These plugs suit hobbyists or technicians replacing a barrel connector on a matching power supply or device. They will not work for equipment requiring a different inner pin diameter or outer sleeve size. Buyers needing right-angle plugs, locking collars or a different pin configuration should look at something else.
Ten plugs provide spares for multiple repairs
The ten-piece quantity gives enough units for several replacements or future spares. Each plug handles a single connection point on a standard DC power device. The pack runs out when all ten connectors have been used or if a project demands a different connector specification.
Highlights
- Reliable power connection with 4.0mm x 1.7mm fit
- Pack of 10 plugs covers multiple repairs
- Lightweight 19 g total weight adds minimal bulk
- 47 mm length fits tight chassis spaces
- Black finish matches common DC equipment aesthetics
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
What jack size must my device have for these 4.0mm x 1.7mm plugs to fit?
The device needs a centre-positive barrel jack with a 4.0 mm outer diameter and a 1.7 mm inner pin to match the plug dimensions.
Can I use these straight plugs where a right-angle connector was previously installed?
Yes, provided the chassis clearance allows the 47 mm straight body; the electrical interface is identical to a right-angle version of the same 4.0 mm x 1.7 mm size.
How can I verify each plug is wired correctly after soldering my cable?
Check continuity between the centre pin and your positive conductor, and between the outer barrel and the negative conductor; all ten plugs should show the same polarity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Ideal 2011s Splice Connector For 2014 Bare Copper Pack 50
- Bare Copper
Bryant Locking Straight Blade Plug L6-20P 20A 250V 2.0HP Black/White 70620
- HAWA



