Unique-Bargains
Unique-Bargains 3Kg 6.6lb Force Gas Spring Rod 100mm Stroke
A 3 kg force gas spring with 100 mm stroke and 6 mm rod diameter for lifting and holding hinged doors or lids
- 3 kg lifting force supports heavy lids and doors
- 100 mm stroke provides 4 inches of smooth travel
- 265 mm ball-centre spacing fits standard mounting points
- 30 mm round plate with pre-drilled hole eases installation
- 6 mm rod and 15 mm tube diameter ensure durable operation
Unique-Bargains 3Kg Gas Spring Rod
The Unique-Bargains 3Kg 6.6lb Force Gas Spring Rod delivers 100mm of stroke for lifting, holding and counterbalancing horizontally hinged doors, lids, hoods and canopies. A 6mm diameter rod operates inside a 120 x 15mm tube constructed from plastic and metal components. Ball centres are spaced 265mm apart for mounting alignment.
Suits lightweight panels and small access hatches
This strut supports panels requiring approximately 3Kg of lift force, making it appropriate for toolbox lids, storage compartments and lightweight canopy sections. Builders needing higher force ratings, longer stroke lengths or different end-fitting geometries should look at alternative specifications. The 10.4 inch ball-centre distance fixes the mounting geometry for this specific unit.
Round plate ends with 30mm diameter holes
Each end terminates in a 30mm diameter round plate featuring a central mounting hole for bolt or stud attachment. The supplied hardware enables direct installation onto compatible brackets without additional fabrication. No brackets, dampers or alternative end fittings are included in the package.
Highlights
- 3 kg lifting force supports heavy lids and doors
- 100 mm stroke provides 4 inches of smooth travel
- 265 mm ball-centre spacing fits standard mounting points
- 30 mm round plate with pre-drilled hole eases installation
- 6 mm rod and 15 mm tube diameter ensure durable operation
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
Do I need a 30 mm diameter mounting hole to install this 3 Kg gas spring?
Yes, the round mounting plate has a 30 mm hole so your bracket or panel must provide a matching opening.
Will the 120 mm tube length and 100 mm stroke clear my existing 265 mm ball-center hinges?
The spring measures 120 mm tube length with a 100 mm stroke and 265 mm ball-center distance; check that your hinge spacing matches this centre-to-centre figure.
How can I verify the rod is delivering the rated 3 Kg force after fitting it?
The rod should hold a 3 Kg (6.6 lb) lid or door steady at mid-stroke without drifting; if it sags or slams, the force is not as specified.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
