Unique-Bargains
Unique-Bargains 3.5mm Male to 3-Screw Terminal Female Wire Cap Connector
Converts a 3.5 mm jack to a three-screw terminal block for solderless microphone or CCTV wiring
- TypeWire Connectors
- Screw terminals let you connect bare wires without soldering
- Gold-plated contacts resist corrosion for reliable signal transfer
- 5 mm stereo plug fits standard audio jacks on cameras and headsets
- Compact 42 x 19 x 13 mm body suits tight installations
- Plastic and zinc-alloy housing protects the internal terminals
Audio connector with screw terminals
This 3.5 mm male plug converts a standard headphone jack into a three-pole screw terminal block. It lets you connect bare wires without soldering, making it useful for CCTV microphones, custom earphone leads or any short-range audio hookup. The gold-plated contacts resist corrosion for reliable signal transfer.
Sustained connection reliability
The screw-down clamps hold each conductor mechanically, so vibration or cable movement will not loosen the joint over time. Gold plating on the contact surfaces maintains low resistance even after repeated mating cycles. The plastic and zinc-alloy housing insulates the terminals and shields them from incidental shorts.
Three-pole stereo layout
The connector provides tip, ring and sleeve connections matched to a standard 3.5 mm stereo socket. If your application needs only two conductors or a balanced mono circuit, this pin count will not match the requirement.
Highlights
- Screw terminals let you connect bare wires without soldering
- Gold-plated contacts resist corrosion for reliable signal transfer
- 5 mm stereo plug fits standard audio jacks on cameras and headsets
- Compact 42 x 19 x 13 mm body suits tight installations
- Plastic and zinc-alloy housing protects the internal terminals
Specifications
| Brand | Unique Bargains |
|---|---|
| Type | Wire Connectors |
Questions about this item
Does the 3.5 mm male plug generate any heat or noise during continuous use?
No, the connector is a passive metal and plastic adapter with no active components, so it produces no heat or audible noise regardless of how long it remains plugged in.
What cable preparation is required before the three screw terminals will accept the wires?
Strip each conductor back a few millimetres, twist the strands, and insert them into the 3-pole terminal block; the screw-down clamps hold bare wire without soldering.
Will the gold-plated 3.5 mm tip make reliable contact with an older 3.5 mm jack that has oxidised contacts?
Yes, the gold plating resists corrosion and maintains low-resistance contact even when the mating jack has aged or oxidised surfaces.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Unique-Bargains 2-Position Speaker Terminal Block 2 Pcs
- HI - Wire & Cable C…



