We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Unique-Bargains

Unique-Bargains 2W 6V Micro Solar Panel Module DIY Polysilicon 136 x 110mm

SKU CH-X0PE-1W73S

A 6 V, 2 W polysilicon solar module measuring 136 x 110 mm and weighing 60 g for low-power charging and DIY projects

  • TypeSolar Panels
  • 2W 6V output charges low-power devices
  • Polysilicon cells perform in weak sunlight
  • 136 x 110mm compact size fits DIY projects
  • 60g lightweight panel is easy to mount
  • Durable frame resists snow and water freezing

Compact 6 V panel for low-power projects

This 2 W polysilicon module measures 136 x 110 mm and weighs 60 g. It is intended for charging small cells, running home lighting, science experiments or a solar water pump. The black and green casing is 3 mm thick and rated at 6 V output.

Passive operation with no moving parts

The panel produces electricity silently and draws no power itself. Its solid frame is designed to resist snow load and prevent water freezing or deformation. Performance is maintained even under weak sunlight thanks to the high conversion rate.

Ready to wire for DIY builds

The package contains one poly solar panel with no extra cables, mounts or controllers included. Builders must add their own connectors, charge controller or battery to suit the target application. The compact 5.4 x 4.3 inch footprint fits tight enclosures.

Highlights

  • 2W 6V output charges low-power devices
  • Polysilicon cells perform in weak sunlight
  • 136 x 110mm compact size fits DIY projects
  • 60g lightweight panel is easy to mount
  • Durable frame resists snow and water freezing

Specifications

BrandUnique Bargains
TypeSolar Panels

Questions about this item

How do I connect the 6V 2W panel to my project and what wiring mistake should I avoid?

Solder leads directly to the two rear contact pads, observing the marked polarity; reversing them will prevent charging or damage the connected device.

What part of the 136 x 110mm polysilicon module is most likely to need replacement over time?

The 3mm thick panel itself has no moving parts; only the soldered wire joints or external connectors typically wear out and need rework.

At what point does the 2W 6V output stop rising even if the sun gets brighter?

The panel is rated at 2W and 6V, so sustained irradiance beyond standard test conditions will not increase power past that 2W limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.