We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small brass nozzles with M6 threads, each 13 mm long and 6 mm wide, shown side by side

Unique-Bargains

Unique-Bargains 2pcs Brass MK8 Nozzle 0.6mm 1.75mm M6 3D Printer

SKU CH-3YY2-EN80E

Two brass MK8 nozzles with 0.6 mm openings for 1.75 mm filament and M6 threads

  • Precise 0.6 mm orifice produces consistent prints with smooth glossy finish
  • High-quality brass resists rust and erosion for durable long-term use
  • M6 thread and 5 mm length enable quick installation on compatible hot ends
  • Supplied cleaning needles clear stubborn clogs without breaking
  • Two nozzles included so a spare is ready when needed

Brass MK8 0.6 mm nozzle pair

Two brass MK8 nozzles with a 0.6 mm bore and M6 thread arrive in a pack of two, ready for 1.75 mm filament printers. They suit owners of Creality CR-10, Prusa i3 and similar MK8 hot-ends who need a quick, low-cost replacement set.

M6 thread and 5 mm thread length

The M6 external thread and 5 mm thread length screw straight into compatible heater blocks without adapters. Brass construction resists corrosion and the rounded chamfer reduces filament resistance, while the stamped size marking lets you identify the bore at a glance.

Brass thermal behaviour

Brass conducts heat quickly so the 0.6 mm tip reaches PLA temperatures of 180-220 and ABS temperatures of 240-280 evenly. The material handles normal printing loads without deformation, and the included cleaning needles help clear clogs without damaging the bore.

Highlights

  • Precise 0.6 mm orifice produces consistent prints with smooth glossy finish
  • High-quality brass resists rust and erosion for durable long-term use
  • M6 thread and 5 mm length enable quick installation on compatible hot ends
  • Supplied cleaning needles clear stubborn clogs without breaking
  • Two nozzles included so a spare is ready when needed

Specifications

BrandUnique Bargains

Questions about this item

What thread standard does the M6 nozzle use and what filament diameter does it cap at?

The nozzle uses an M6 thread with a 5 mm thread length and accepts 1.75 mm filament through a 0.6 mm outlet.

What are the overall dimensions of each brass nozzle?

Each nozzle measures 13 mm long by 6 mm in diameter (0.51 x 0.24 inch).

What temperature should the hot end reach before removing or fitting the nozzle?

Heat the nozzle and heat block to 180-220 °C for PLA or 240-280 °C for ABS before unscrewing the old nozzle and tightening the new one.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.