Unique-Bargains
Unique-Bargains 2pcs Black 2P PCB DIP Mount CR2032 CR2025 Battery Socket Holder
Two-piece black DIP-mount socket holds a single CR2032 or CR2025 coin cell on a PCB
- Holds CR2032 and CR2025 cells securely
- Two-terminal DIP layout simplifies PCB mounting
- Compact 22 mm diameter fits tight board spaces
- 20 mm pin spacing matches standard footprints
- Supplied as a pair for multiple projects
Coin-cell PCB socket — 2-pin DIP mount
This holder accepts a single CR2032 or CR2025 coin cell and mounts through-hole on a printed circuit board. Two black plastic-and-metal sockets are supplied, each weighing 3 g with a maximum body size of 22 x 9 mm. The battery itself is not included.
Replaces loose cells or soldered tabs
The DIP footprint lets you swap a depleted CR2032 or CR2025 without desoldering, which is useful when a design needs occasional replacement or when prototyping boards that will later ship with a fixed cell. The jump is worth it whenever serviceability outweighs the slight height increase of the 9 mm body.
Check pin spacing and cell diameter first
Verify that your PCB layout provides a 20 mm pin pitch and a 20 mm inner diameter to match the holder. Ensure the 0.9 x 0.35 inch outline fits within any enclosure clearance, and confirm the circuit only requires two terminals for the intended coin-cell chemistry.
Highlights
- Holds CR2032 and CR2025 cells securely
- Two-terminal DIP layout simplifies PCB mounting
- Compact 22 mm diameter fits tight board spaces
- 20 mm pin spacing matches standard footprints
- Supplied as a pair for multiple projects
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
Will the 20 mm pin spacing match my PCB layout for a CR2032 holder?
The pins are spaced 20 mm apart, matching standard DIP footprints for CR2032 and CR2025 cells.
How do I solder the two terminals without melting the plastic body?
Apply heat briefly to each pin; the plastic body measures 22 x 9 mm and can tolerate normal hand-soldering temperatures.
When should I replace the socket if the spring contacts lose tension?
Replace the holder if coin cells sit loosely or show intermittent contact after repeated insertions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
