Unique-Bargains
Unique-Bargains 2Pcs Anti-Static ESD Grounding Coil Cable 55cm
Coiled anti-static grounding cable with alligator clip and ring terminal protects static-sensitive electronics, 55 cm unstretched length
- Protects sensitive electronics from static discharge
- Coiled cable stretches to 55 cm for flexible reach
- Alligator clip and ring terminal ensure secure grounding
- Two-piece set covers multiple workstations at once
- Lightweight 44 g design adds minimal bulk to toolkit
Anti-Static Grounding Cable Kit
This kit supplies two anti-static grounding cables designed to divert static charge from personnel and work surfaces. Each cable uses a coiled PVC lead fitted with an alligator clip, cupule, claw, ring terminal and dual button studs. The assembly weighs 44 g and is intended for ESD-safe assembly, repair or test environments.
Suitable for bench ESD control.
Technicians who need a flexible ground path between a mat, wrist strap or chassis and a verified earth point will find the coil convenient. The 55 cm unextended length limits reach across large benches, so builders who need longer fixed runs should look at straight cables. The alligator clip opens to 0.5 cm, which may not grip thick bus bars or painted surfaces reliably.
55 cm coiled length with dual button studs
The single dimension that decides fit is the 55 cm unstretched coil length combined with standard 4 mm button studs on both ends. If the distance between your grounding point and mat stud exceeds this unextended length, the cable will not connect without tension. All other hardware — clip, cupule, claw and ring terminal — is fixed to the assembly.
Highlights
- Protects sensitive electronics from static discharge
- Coiled cable stretches to 55 cm for flexible reach
- Alligator clip and ring terminal ensure secure grounding
- Two-piece set covers multiple workstations at once
- Lightweight 44 g design adds minimal bulk to toolkit
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
Does the 55cm coil cable generate any heat or electrical noise during continuous grounding use?
The cable is a passive conductor with no power source, so it produces no heat and no electrical noise while grounding ESD mats.
What must already be in place for the alligator clip and ring terminal to connect properly?
You need an ESD mat or workbench with a grounding stud, plus a grounded mains outlet or earth point for the ring terminal.
Will the 5mm wide clip fit the grounding posts on older ESD wrist-strap stations?
The clip opens to roughly 5mm, matching standard 4mm banana posts found on most legacy wrist-strap grounding blocks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
