We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Unique-Bargains

Unique-Bargains 2Pcs 15" 200N/45LB Black Gas Spring Lift Supports

SKU CH-KS3Z-CJA5J

Two 15-inch, 200 N gas springs lift and hold bonnets, hatches or compartments weighing 36 to 50 lb, with brackets and nuts included

  • TypeAT - Garage & Shop
  • Hands-free access with 200N gas springs
  • Installs in minutes using basic hand tools
  • Fits 36–50 lb lids on cars and boats
  • Black metal struts with M8×1.25 threads
  • Includes two struts plus four brackets and nuts

Universal Lift Supports

These gas springs measure 38.5cm extended and 23cm compressed with a 15cm rod. Each strut delivers 200N of force and mounts using M8x1.25 threads with supplied brackets. The pair suits lids weighing between 36 and 50 pounds total.

Heavy lids need stronger struts

Buyers with covers exceeding 50 pounds should select higher-force units. Installers lacking M8 threaded holes must drill or adapt brackets. The fixed 15-inch stroke cannot be shortened for smaller hatches.

Brackets and nuts included

Four mounting brackets with 8mm round and 10x8mm oval holes bolt directly to metal surfaces. Supplied M8 nuts secure the strut ends without extra hardware. Installation uses basic hand tools only.

Highlights

  • Hands-free access with 200N gas springs
  • Installs in minutes using basic hand tools
  • Fits 36–50 lb lids on cars and boats
  • Black metal struts with M8×1.25 threads
  • Includes two struts plus four brackets and nuts

Specifications

BrandUnique Bargains
TypeAT - Garage & Shop

Questions about this item

What mounting hardware do I need to attach the M8x1.25 threaded rods?

The kit includes four mounting brackets and four nuts that fit the M8x1.25 thread, so no extra hardware is required.

Will the 200 N force per strut overpower a lighter hatch that originally used weaker springs?

Two struts at 200 N each support a combined load of 36 to 50 lb; if your hatch falls below 36 lb the struts may hold it open too firmly.

How can I confirm the struts are the correct 15 inch extended length after installation?

Measure from centre to centre of the bracket holes when the hatch is fully open; the distance should read 38.5 cm (15 in).

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.