Unique-Bargains
Unique-Bargains 200Pcs Jumper Caps 2.54mm Black conduit
Pack of 200 black 2.54mm jumper caps for configuring motherboard and drive settings
- TypeHI - Conduit & Fittings
- 200 pieces included for multiple system configurations
- 54 mm pitch matches standard motherboard headers
- Black colour allows quick visual identification
- 23 g total weight keeps shipping light
- 6 x 5 x 2.5 mm compact size fits tight board layouts
Jumper caps for motherboard configuration
These 2.54 mm jumper caps control settings on circuit boards, hard drives and motherboards. The pack contains 200 pieces to cover multiple builds or replacements. They suit technicians and hobbyists who need reliable shunt links for internal device setup.
Thermals noise and power draw
As passive plastic shunts the caps generate no heat and make no audible noise during operation. They draw zero power and add negligible mass at 23 g per hundred units. Normal use simply requires placing or removing a cap on the appropriate header pins.
What the bundle changes
The 200-piece quantity provides enough caps for large-scale assembly or service work without reordering. Each cap measures 6 x 5 x 2.5 mm with a 2.54 mm pitch to fit standard headers. The black colour aids visual identification inside crowded chassis.
Highlights
- 200 pieces included for multiple system configurations
- 54 mm pitch matches standard motherboard headers
- Black colour allows quick visual identification
- 23 g total weight keeps shipping light
- 6 x 5 x 2.5 mm compact size fits tight board layouts
Specifications
| Brand | Unique Bargains |
|---|---|
| Type | HI - Conduit & Fittings |
Questions about this item
How do I install the 2.54 mm jumper caps on a motherboard header, and what is the common mistake?
Align the cap with the two pins and press straight down until it seats fully; the mistake is forcing it at an angle, which bends the pins.
Will the black jumper caps degrade or need replacement over time?
The plastic housings are stable under normal indoor temperatures; they only need replacement if a cap is lost or physically cracked.
What is the first limit reached when many caps are used continuously on a powered header?
The 2.54 mm pitch and 6 mm length set the physical spacing limit; electrical load is determined by the header design, not the caps themselves.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Scosche
Scosche 8" PRO Midbass Driver 200W RMS 400W Peak 60-8000Hz 97dB 4Ω 3.75" Depth
$9.99
0.00012005BTC
In stock