Unique-Bargains
Unique-Bargains 200FZY2-D Industrial Cooling Fan 210x210x72mm DC 220V/240V 0.45A Dual Ball Bearing
A 210 mm square industrial cooling fan delivering 459 m³/h airflow at 2600 RPM with dual ball bearings for 220–240 V DC systems
- High airflow of 459 m³/h for effective cooling
- Dual ball bearings extend operational lifespan
- 210 mm square frame fits 166 mm mounting holes
- DC 220 V to 240 V input suits industrial power supplies
- 65 W power draw at 2600 RPM with ±10 % tolerance
Industrial square frame 210mm
The Unique-Bargains 200FZY2-D is a square industrial cooling fan measuring 210 by 210 by 72 millimetres. It operates on DC 220V to 240V input with a rated current of 0.3A and a power draw of 65W. Dual ball bearings support the 2600 RPM motor. The unit weighs 1285 grams and mounts on a 166 by 166 millimetre hole pattern.
Replaces smaller axial units
This fan suits installations that need higher airflow than compact axial models can deliver. The 459 cubic metres per hour rating makes the jump worthwhile when equipment runs hot in confined enclosures. It is not for buyers who need a lower voltage AC alternative or a thinner profile below 72 millimetres.
Steady output at 2600 RPM
Dual ball bearings maintain consistent rotational speed during continuous duty cycles. The 10 percent RPM tolerance stays tight under sustained thermal load. Airflow remains near the 459 cubic metres per hour mark without the drop-off common in sleeve-bearing designs. The 65 watt input stays stable across the voltage range.
Highlights
- High airflow of 459 m³/h for effective cooling
- Dual ball bearings extend operational lifespan
- 210 mm square frame fits 166 mm mounting holes
- DC 220 V to 240 V input suits industrial power supplies
- 65 W power draw at 2600 RPM with ±10 % tolerance
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
What are the mounting hole dimensions for the 210x210mm frame?
The mounting holes are spaced 166 x 166 mm apart, matching the 210 x 210 mm frame size.
How do I wire the DC 220V/240V supply correctly?
Connect the supply directly to the fan leads; the unit draws 0.3A at 65W and must be powered from a DC source, not AC mains.
When should the dual ball bearings be replaced?
The dual ball bearings are rated for long life at 2600 RPM; plan inspection after extended continuous duty and replace if noise or vibration increases.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
