We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five pairs of red and black alligator clips with plastic covers on the tails

Unique-Bargains

Unique-Bargains 20 A Alligator Clips Red/Black 5 Pairs 15 mm Jaw

SKU CH-JD3F-JP2RT

Set of ten 20 A alligator clips with 15 mm maximum jaw opening for test leads and low-voltage jumpers

  • TypeTest Leads
  • Rated for 20 A continuous current
  • 15 mm maximum jaw opening grips thick conductors
  • Red and black pairs simplify polarity identification
  • 60 mm long side with 3.9 mm hole eases wire attachment
  • Supplied as five red and five black clips

Ready-to-use test leads

Five red and five black alligator clips arrive with plastic tail covers already fitted so they can be used straight away for bench work or quick circuit assembly. The jaws open to 15 mm and accept wire through a 3.9 mm hole at the end of the longer 60 mm arm.

Suits low-voltage lab and repair tasks

Hobbyists, students and technicians who need a handful of 20 A rated clips for temporary connections will find the set convenient. Buyers who need higher current capacity, insulated jaws or a different jaw profile should look at something else.

Covers and tail holes speed up wiring

The supplied red and black plastic boots protect the connection point and the 3.9 mm tail holes let you solder or crimp wires without extra terminals. No additional hardware or software is included.

Highlights

  • Rated for 20 A continuous current
  • 15 mm maximum jaw opening grips thick conductors
  • Red and black pairs simplify polarity identification
  • 60 mm long side with 3.9 mm hole eases wire attachment
  • Supplied as five red and five black clips

Specifications

BrandUnique Bargains
TypeTest Leads

Questions about this item

What wire diameter fits through the 3.9 mm tail hole on these clips?

The tail hole measures 3.9 mm in diameter, so any solid or stranded conductor that passes through that opening can be crimped or soldered in place.

Will the 15 mm maximum jaw opening grip the same battery posts and component leads that my older, smaller clips handle?

Yes, the 15 mm jaw opens wider than many vintage clips, so it will hold standard automotive battery terminals and typical through-hole component leads without slipping.

How can I confirm each clip is rated for the marked 20 A after I attach my own wires?

Check that the red and black insulation covers are seated, verify a firm mechanical crimp or solder joint at the 3.9 mm tail hole, then measure continuity and low resistance across the jaws with a multimeter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.