Unique-Bargains
Unique-Bargains 2 x Dual Wireless 9V Battery Clip Connectors
Two 9 V battery clip connectors with 18 cm leads and faux-leather housings, supplied as a pair for quick replacement
- Compact 1.2" x 0.6" x 0.28" clip fits tight spaces
- 1" cable reaches awkward battery compartments
- Faux leather shell protects wires from abrasion
- Colour-coded black and red leads prevent polarity mistakes
- Two connectors per pack give an immediate spare
Dual 9V Clip Connectors
This pack supplies two wired 9V battery clip connectors for hobbyists, repair technicians and anyone powering low-voltage devices. Each unit combines a faux leather shell with black and red leads for quick polarity identification. The compact form factor suits breadboard work, prototype rigs and field repairs where space is limited. Battery cells are not included.
Thermals Noise Power
The passive clips draw no power themselves and add no audible noise to a circuit. Rated for DC 3-12V operation, they simply conduct whatever the connected load requires. The 18cm lead length keeps the battery clear of hot components without introducing measurable voltage drop in typical low-current applications. No active cooling is involved.
What The Extras Change
Two connectors in one pack let you run a primary circuit and a backup or parallel load without hunting for a second holder. The pre-stripped red and black wires remove the need for soldering or crimping during initial assembly. The faux leather shell protects the solder joints from flex damage while keeping the overall footprint at 3 x 1.5 x 0.7cm.
Highlights
- Compact 1.2" x 0.6" x 0.28" clip fits tight spaces
- 1" cable reaches awkward battery compartments
- Faux leather shell protects wires from abrasion
- Colour-coded black and red leads prevent polarity mistakes
- Two connectors per pack give an immediate spare
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
How do I attach the 9V battery clip to the battery terminals, and which wire goes to the positive side?
Snap the connector onto the 9V battery terminals; the red wire connects to the positive terminal and the black wire to the negative terminal.
What part of the 9V battery clip connector is most likely to wear out and need replacement?
The faux leather shell and the 18 cm wires can fray or crack after repeated bending, so inspect them periodically and replace the clip if insulation is damaged.
At what voltage does the 9V battery clip connector reach its rated limit during continuous use?
The connector is rated for up to 12 V DC, so sustained operation above that voltage exceeds its specification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
