We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two silver zinc-plated M10 threaded rods 500mm long

Unique-Bargains

Unique-Bargains 2 Pcs M10 1mm Thread Zinc Plated Down Rod 500mm

SKU CH-YC9Z-W5ADJ

Two 500 mm M10 threaded zinc-plated rods with 1 mm pitch for wiring lamps and chandeliers

  • Hollow M10 rod threads cable cleanly
  • 1 mm fine pitch ensures tight lamp fit
  • Zinc plating resists corrosion on fixtures
  • Two 500 mm pieces cover larger projects
  • Light 172 g pair eases overhead installs

Two-Piece M10 Down Rod Set

This set contains two new zinc-plated steel down rods with M10 threads at a 1 mm pitch. Each rod measures 500 mm in length and 10 mm in diameter. They are intended for lamps, chandeliers, candelabras and similar light fittings that require a hollow tube for threading cable.

Straightforward Threaded Installation

The fine 1 mm pitch M10 threads allow the rods to screw directly into compatible fixtures or couplers without adapters. The hollow bore provides a clear path for electrical cable. Mis-matched thread pitch or diameter is the typical reason a rod will not engage, so verify the host fitting uses the same M10 by 1 mm specification before starting.

Consistent Rigidity Under Continuous Load

The solid 10 mm diameter steel tube resists bending across the full 500 mm span when supporting a fixture's weight over long periods. Zinc plating protects the surface from corrosion in indoor environments. The pair weighs 172 g in total, giving a predictable load characteristic for permanent ceiling or wall-mounted lighting installations.

Highlights

  • Hollow M10 rod threads cable cleanly
  • 1 mm fine pitch ensures tight lamp fit
  • Zinc plating resists corrosion on fixtures
  • Two 500 mm pieces cover larger projects
  • Light 172 g pair eases overhead installs

Specifications

BrandUnique Bargains

Questions about this item

How do I confirm the M10 1mm thread fits my lamp fitting after installation?

Screw the rod into the fixture; the 1mm pitch thread should engage smoothly and hold the 500mm length firmly without wobble.

What comes in the package and is anything else needed?

The box contains 2 zinc-plated M10 nipples weighing 172g total; no cable or fixings are included so you must supply your own wiring and mounting hardware.

Which thread specification should I choose for a standard lamp project?

Select the M10 size with 1mm fine pitch — listed as 10mm diameter and .39 inch — to match common lamp and chandelier fittings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.