Unique-Bargains
Unique-Bargains 2 Pcs 6V Output 4 x AA Battery Double Layer Storage Case Box Holder Wires Black
A double-layer ABS case holds four AA cells and delivers 6 V output for external power needs
- Holds four AA cells for 6 V output
- Double-layer ABS shell keeps cells secure
- Weighs only 21 g for easy transport
- Two holders included for spare or parallel use
- Ready for soldering or direct wiring connections
Two-Pack 6V AA Battery Holder
This pack supplies two black ABS holders, each accepting four 1.5V AA cells to deliver 6V output. The double-layer design keeps cells secure while remaining lightweight at 21g per pair. Intended for hobbyists and technicians who need a portable external power source for soldering or low-voltage projects. Cells are not included with the holders.
Replaces Loose Cells or Taped Packs
Swapping loose batteries or makeshift tape bundles for these holders eliminates intermittent contacts and short-circuit risk. The upgrade is worth it when a project demands reliable 6V delivery and quick cell changes without desoldering. Builders who need higher voltage or a different cell count will not be served by this fixed 4×AA configuration.
Simple Snap-In Installation
Cells slide into the moulded compartments and the integrated wires connect directly to the load, so no tools or soldering are required for basic use. The main issue arises if cell lengths vary slightly, which can prevent the lid from closing or cause poor contact at the springs. Ensuring all four cells are fresh and of identical length avoids this problem.
Highlights
- Holds four AA cells for 6 V output
- Double-layer ABS shell keeps cells secure
- Weighs only 21 g for easy transport
- Two holders included for spare or parallel use
- Ready for soldering or direct wiring connections
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
How many AA batteries does each holder accept and what voltage does it deliver?
Each holder accepts four 1.5V AA batteries wired in series to deliver a 6V output for the connected device.
What is the correct way to insert the batteries so the holder supplies 6V?
Insert all four AA cells in the same orientation following the polarity markings inside the double-layer case; reversing any cell breaks the series circuit and prevents the 6V output.
What should be checked periodically to keep the holder working reliably?
Inspect the internal contacts and the attached wires for corrosion or loose connections, and replace any AA cells that no longer hold a full 1.5V charge.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
