Unique-Bargains
Unique-Bargains 2.54mm Pitch 2x7Pin Female to Female 14 Wire IDC Flat Ribbon Cable 300mm 12-inch Conduit
A 300 mm flat ribbon cable with two 7-pin IDC connectors for AVR JTAG debuggers and ISP programmers
- TypeHI - Conduit & Fittings
- 54 mm pitch matches standard IDC headers
- 14 wires carry multiple signals in one cable
- Female-to-female ends plug directly onto pin rows
- 300 mm length spans typical board-to-board distances
- Grey-black flat ribbon keeps wiring tidy inside enclosures
2.54mm Pitch 14-Wire IDC Ribbon Cable
This 300mm flat ribbon cable carries 14 conductors on a 2.54mm pitch. It terminates in female-to-female IDC connectors at each end. The grey and black conduit measures 1.8cm wide and weighs 14g. It is designed for direct board-to-board or board-to-programmer links.
Suits AVR JTAG and ISP programming setups
Engineers flashing Atmel AVR microcontrollers via JTAG debuggers or in-system programmers will find the pinout and pitch match common 2x7 headers. Builders needing a different wire count, a male connector, or a longer reach should select another cable. The fixed 30cm length also limits use inside larger enclosures.
2.54mm pitch on 14 wires decides compatibility
The connector pitch and wire count must match the target header exactly or the cable will not seat. Verify that the device uses a 2x7 pin header with 2.54mm spacing before ordering. No other specification in the listing affects fit.
Highlights
- 54 mm pitch matches standard IDC headers
- 14 wires carry multiple signals in one cable
- Female-to-female ends plug directly onto pin rows
- 300 mm length spans typical board-to-board distances
- Grey-black flat ribbon keeps wiring tidy inside enclosures
Specifications
| Brand | Unique Bargains |
|---|---|
| Type | HI - Conduit & Fittings |
Questions about this item
What does the 2.54 mm pitch mean when I plug this cable into a board?
The 2.54 mm pitch matches standard pin headers so the 14-wire IDC connectors seat directly without adapters.
How does the IDC interface affect what I can connect?
The insulation-displacement connectors grip all 14 wires at once, giving a reliable flat-cable link for JTAG, ISP or similar low-speed signals.
What clearance do I need to route the 300 mm ribbon?
The ribbon is 1.8 cm wide and 30 cm long, so allow at least that width in cable trays or panels; the grey-black jacket adds minimal bulk.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



