Unique-Bargains
Unique-Bargains 15Pcs 5.5mmx2.1mm Male DC Plug Jack Solder Type Connector Adapter straight blade plug
Pack of 15 solder-type 5.5 mm × 2.1 mm male DC plugs for power-supply repair or custom cables
- TypeHI - Power Plugs & Connectors
- 15 connectors per pack for multiple repairs
- 5 mm × 2.1 mm barrel fits common DC devices
- Solder terminals create a secure permanent joint
- 5 mm cable entry matches standard wire gauges
- Compact 44 mm length suits tight enclosures
15-Pack 5.5mm x 2.1mm DC Power Plugs
This pack contains fifteen straight blade male DC plug connectors with a 5.5mm outer diameter and 2.1mm inner pin. They are designed for solder-type attachment to a cable, making them suitable for repairing or building custom power supply leads for compatible devices.
Check Cable Diameter and Polarity Before Use
The connectors accept a cable diameter of approximately 4.5mm, so verify your wire insulation fits this size. Ensure the tip-positive or tip-negative polarity matches your equipment, as the plug housing does not enforce a specific wiring standard.
Replaces Damaged or Missing Barrel Jack Connectors
These plugs serve as direct replacements for worn or broken 5.5mm x 2.1mm barrel connectors on existing power cables. The upgrade is worthwhile when the original moulded plug has failed and a solderable, serviceable connector is preferred over a pre-assembled lead.
Highlights
- 15 connectors per pack for multiple repairs
- 5 mm × 2.1 mm barrel fits common DC devices
- Solder terminals create a secure permanent joint
- 5 mm cable entry matches standard wire gauges
- Compact 44 mm length suits tight enclosures
Specifications
| Brand | Unique Bargains |
|---|---|
| Type | HI - Power Plugs & Connectors |
Questions about this item
What comes in the pack and do I need any extra parts to solder these plugs?
The pack contains 15 black and silver-tone DC plugs, each measuring 44 mm by 10 mm and weighing 24 g total. You will need your own cable up to 4.5 mm diameter and a soldering iron to attach the wires.
Should I choose a different size or is the 5.5 mm by 2.1 mm version the right one for standard DC devices?
This listing only offers the 5.5 mm outer and 2.1 mm inner diameter size, which fits most standard DC power equipment. If your device uses a different barrel size you will need a different connector.
Once soldered, how much space does each straight blade plug take up inside a device chassis?
Each plug is 44 mm long and 10 mm in diameter, so allow roughly 1.7 inches by 0.39 inches of clearance behind the panel for the soldered joint and strain relief.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Ideal 2011s Splice Connector For 2014 Bare Copper Pack 50
- Bare Copper
Bryant Locking Straight Blade Plug L6-20P 20A 250V 2.0HP Black/White 70620
- HAWA



