Unique-Bargains
Unique-Bargains 15mm Mylar Tape 50m Clear
Clear 15 mm Mylar tape on a 50 m roll withstands 130 °C and provides 5.5 kV breakdown voltage for electrical insulation
- FeaturesMylar tape;reflective tape;transformer tape;mylar roll;mylar
- 15 mm width fits narrow component gaps
- 50 m roll length covers multiple assembly tasks
- 130 °C temperature rating suits transformer and motor insulation
- 5 kV breakdown voltage protects against electrical stress
- 94V-0 flammability rating meets strict safety requirements
Electrical insulation tape
This 15 mm wide polyester film tape provides 5.5 kV breakdown voltage and a 94V-0 flammability rating for transformer, motor and capacitor winding. The acrylic adhesive withstands 130 °C continuous temperature and resists solvents and moisture. Supplied as a 50 m roll with 0.06 mm or 0.08 mm substrate thickness.
For electrical assembly and repair
Suits technicians insulating coil windings, splicing magnet wire or wrapping high-voltage components where thermal class 130 and 5.5 kV dielectric strength are required. Not for buyers needing wider tapes, longer lengths or higher voltage ratings than the stated 5.5 kV.
5.5 kV breakdown voltage
This single figure confirms whether the tape meets the dielectric requirement of the specific winding or component being insulated. If the design calls for a higher withstand voltage, this roll will not satisfy the specification.
Highlights
- 15 mm width fits narrow component gaps
- 50 m roll length covers multiple assembly tasks
- 130 °C temperature rating suits transformer and motor insulation
- 5 kV breakdown voltage protects against electrical stress
- 94V-0 flammability rating meets strict safety requirements
Specifications
| Brand | Unique Bargains |
|---|---|
| Features | Mylar tape;reflective tape;transformer tape;mylar roll;mylar firm |
Questions about this item
Will the 15 mm wide roll fit my standard tape dispenser?
The roll is 15 mm wide, so it fits any dispenser that accepts a 15 mm core width.
How do I apply the tape so the acrylic adhesive bonds properly?
Clean the surface, then press the tape firmly; the acrylic adhesive needs full contact to reach its rated peel strength.
When should I replace tape used for 130 °C transformer insulation?
Inspect regularly; replace the tape if the polyester film discolours, cracks, or loses adhesion after prolonged 130 °C exposure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Zoro Select Probe Covers 15-617-000 PK500 Transparent
- Transparent
HealthSmart 18-220-000 Infrared Digital Thermometer Gray/White
- Gray/White
HealthSmart Foods, Inc. 04-655-001 Digital Blood Pressure Monitor Arm Adult Black
- Black



