We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fifteen silver and black Micro USB B male solder plugs, each 13 by 7 by 5 mm

Unique-Bargains

Unique-Bargains 15 Micro USB 5-Pin Type B Male Connector Solder Plug

SKU CH-RQSM-PKJAC

Pack of fifteen micro-USB Type-B male solder connectors with metal shields for cable repair or custom builds

  • TypeHI - Conduit & Fittings
  • 15 connectors in one pack for multiple repair jobs
  • Male Micro USB Type B 5-pin interface fits compatible devices
  • Metal shield and plastic body withstand soldering heat
  • Compact 13 x 7 x 5 mm size suits tight PCB layouts
  • Solder-type terminals create permanent board-level connections

Micro USB B 5-pin male connectors

This pack contains fifteen Micro USB Type B male connectors with a metal shield and solder contacts. They arrive unassembled so each plug must be built by hand after purchase. The parts suit repair work, prototype wiring or custom cable builds where a compact Micro USB B interface is required. Each connector measures 13 x 7 x 5 mm and weighs about 11 g total for the set.

Solder-type assembly changes the workflow

Because the connectors are not pre-assembled, the user must solder wires to the five pins and fit the metal shield themselves. This allows custom cable lengths and pin-outs but demands a soldering iron, flux and basic soldering skill. The metal housing provides shielding once closed, yet the plastic insulator can melt if heat is applied too long. No crimp or screw-terminal option is included in the pack.

Micro USB B interface limits speed and power

The Micro USB B 5-pin standard tops out at USB 2.0 signalling rates and the standard 5 V, 0.5 A power envelope unless the host negotiates higher current. It cannot carry USB 3.x data lanes, video signals or Power Delivery profiles. The small 13 mm body leaves little strain relief, so repeated insertion cycles may fatigue the solder joints. Buyers needing faster throughput or higher power should choose a different connector family.

Highlights

  • 15 connectors in one pack for multiple repair jobs
  • Male Micro USB Type B 5-pin interface fits compatible devices
  • Metal shield and plastic body withstand soldering heat
  • Compact 13 x 7 x 5 mm size suits tight PCB layouts
  • Solder-type terminals create permanent board-level connections

Specifications

BrandUnique Bargains
TypeHI - Conduit & Fittings

Questions about this item

Do the solder pads on these Micro USB connectors wear out after repeated rework?

The pads are standard copper on a small 13 x 7 mm board; careful temperature control and limited reflow cycles will extend their life.

What fails first when the plug is mated and unmated daily?

The 5-pin metal shield and plastic housing are rated for typical insertion cycles; the solder joints on the 0.51 x 0.28 inch footprint usually give way before the connector body.

Does the connector get warm or draw noticeable power when left plugged in all day?

As a passive 11 g component it adds no measurable heat or power draw; any warmth comes from the host device, not the plug itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.