We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver braided 110 cm motorcycle brake clutch hose with 10 mm banjo ends at 28 and 90 degree bends

Unique-Bargains

Unique-Bargains 110 cm Motorcycle Brake Clutch Oil Hose Silver Tone

SKU CH-Z30D-AQJCC

Universal 110 cm stainless-steel braided silicone hose with 10 mm banjo ends bent 28° and 90° for motorcycle brake or clutch systems

  • Universal fit for most motorcycles
  • 110 cm length with 10 mm banjo ends
  • Silicone and stainless steel resist kinking and weathering
  • 28° and 90° banjo bends suit varied routing
  • Simple push-on installation with clip retention

Universal motorcycle brake hose

The Unique-Bargains hose is a silver-toned hydraulic line built for motorcycle brake and clutch systems. Its reinforced stainless-steel braid over a silicone core resists kinking, weathering and tearing while adding a clean finish to the bike's plumbing. The universal design fits most motorcycles needing a replacement pressure-transfer line.

Banjo-end constraints

Each end uses a banjo fitting with a 10mm inner diameter, and the two bends are fixed at 28 degree and 90 degree. The overall length measures 110cm from centre of hole to centre of hole, so installers must verify that the routing and master-cylinder spacing match these exact angles and reach before ordering.

Replaces worn rubber lines

This hose upgrades cracked, leaking or softened original rubber brake and clutch lines that have lost pressure integrity over time. The jump is worth it when the factory hose shows external cracking, weeping fluid or a spongy lever feel caused by hose expansion under pressure. Builders needing a different banjo angle or a longer routing should look elsewhere.

Highlights

  • Universal fit for most motorcycles
  • 110 cm length with 10 mm banjo ends
  • Silicone and stainless steel resist kinking and weathering
  • 28° and 90° banjo bends suit varied routing
  • Simple push-on installation with clip retention

Specifications

BrandUnique Bargains

Questions about this item

Which length should I choose for my motorcycle?

This hose measures 110 cm / 43.31" from banjo centre to centre, so match that to your routing distance and allow a little slack for steering movement.

What does the 10 mm banjo inner diameter mean when the hose is fitted?

The 10 mm / 0.39" bore fits standard 10 mm banjo bolts found on most motorcycle brake and clutch masters and calipers.

How do the 28° and 90° banjo bends affect installation?

One end bends 28° and the other 90°, letting the stainless-steel braided line clear fairings or frame tubes without sharp kinks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.