Unique-Bargains
Unique-Bargains 10pcs 3mm Rubber Strain Relief Cord Boot White
Pack of 10 rubber strain-relief boots with 3 mm inner diameter and 26 mm length to protect cables from bending
- FeaturesWire Sleeve;Protective Hose;for Cellphone Charger;3mm Inner
- Protects cables from bending damage with rubber strain relief boot
- Fits 3mm diameter wires using precise 3mm inner diameter sleeve
- Ten pieces supplied for multiple cable protection projects
- Compact 26mm length adds minimal bulk to connections
- White finish suits clean installations on chargers and power tools
10-Pack Cable Strain Relief Boots
This 10-piece set of white rubber cord boots fits cables with a 3 mm inner diameter. They protect wires from bending stress at connection points on aviation plugs, power tools and electric drills. Each boot measures 26 mm long with a 5.5 mm bayonet outer diameter. The pack suits technicians and hobbyists who need multiple identical protectors for workshop or field repairs.
Replaces Worn or Missing Factory Boots
Use these when original strain reliefs have cracked, hardened or fallen off after repeated flexing. The upgrade is worth it if the cable jacket is still intact but the relief groove is damaged, preventing further insulation splits. They are not for cables thicker than the stated inner diameter or for high-temperature environments beyond standard rubber tolerance.
Simple Push-On Installation
Slide the boot over the cable end before terminating the connector, then seat the bayonet flange into the plug body. The tight rubber fit holds without adhesive, but oil or debris on the cable can cause slippage. Ensure the 3 mm bore matches the wire exactly; forcing a larger cable tears the sleeve and defeats the protection.
Highlights
- Protects cables from bending damage with rubber strain relief boot
- Fits 3mm diameter wires using precise 3mm inner diameter sleeve
- Ten pieces supplied for multiple cable protection projects
- Compact 26mm length adds minimal bulk to connections
- White finish suits clean installations on chargers and power tools
Specifications
| Brand | Unique Bargains |
|---|---|
| Features | Wire Sleeve;Protective Hose;for Cellphone Charger;3mm Inner Dia;Protective Pipe |
Questions about this item
What is the inner diameter of each rubber boot so I know which cables will fit?
Each boot has a 3 mm inner diameter, so it fits cables up to about 0.12 inches thick.
How do I install these boots on my cables without damaging them?
Slide the boot onto the cable before attaching the connector, then push the boot over the strain-relief area; forcing it over a large plug can tear the rubber.
When should I replace these boots if they start to wear out?
Replace a boot when the rubber cracks, hardens, or no longer grips the cable at the 26 mm length, leaving the wire exposed to bending stress.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
