Unique-Bargains
Unique-Bargains 10pcs 3mm Inner Dia Strain Relief Cord Boot Protector Power Tool Hose White
Pack of ten 3mm inner-diameter boots shields charger and power-tool cables from bending stress
- Protects cables from bending damage with 3mm inner diameter
- Ten protectors included for multiple wire applications
- Fits phone chargers, aviation plugs and power tool cords
- Compact 25mm length adds strain relief without bulk
- White finish suits clean installations and easy identification
10-Pack 3 mm Strain Relief Boots
This pack supplies ten white cord protectors with a 3 mm inner diameter. They fit phone chargers, aviation plugs, power tools and electric drill cables. Each boot stops the wire from bending sharply at the connector. The parts are new and ready for workshop or home use.
Check Cable Diameter and Slot Width
Measure the cable jacket to confirm it matches the 3 mm inner diameter. Verify the connector housing can accept the 2.1 x 5.5 mm card slot so the boot seats correctly. The overall length is 25 mm and the outer diameter is 9.7 mm; ensure there is room behind the plug. No tools are required for installation.
Suits Multi-Cable Maintenance Kits
Electricians and DIY users who service several chargers or tool leads will value the ten-piece quantity. Buyers protecting a single cable or needing a different inner diameter should look at single units or other sizes. The white colour may not match dark cable jackets where a black boot would blend better.
Highlights
- Protects cables from bending damage with 3mm inner diameter
- Ten protectors included for multiple wire applications
- Fits phone chargers, aviation plugs and power tool cords
- Compact 25mm length adds strain relief without bulk
- White finish suits clean installations and easy identification
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
What is included in the package and do I need to buy any cables separately?
The package contains 10 white cord protector relief boots. Cables or wires are not included and must be purchased separately if you do not already have them.
Which inner diameter should I choose for my charger or power tool cable?
These boots have a 3 mm / 0.12 inch inner diameter. Choose them only if your cable’s outer diameter matches that size; otherwise they will not fit.
What does the 25 mm total length mean once the boot is fitted on a cable?
The 25 mm / 0.98 inch length covers the cable entry point, reinforcing the bend radius so the wire cannot kink sharply at the connector.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
