We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Epoxy-tipped NTC thermistor probe with XH2.54-2P connector, 15.7 inch cable

Unique-Bargains

Unique-Bargains 10K NTC Thermistor Probe 15.7 Inch Epoxy Sensor

SKU CH-VSJZ-7SP62

A 10K NTC thermistor probe with XH2.54-2P connector measures from -30 °C to +105 °C for air-conditioner monitoring

  • 10K NTC thermistor gives precise temperature readings
  • XH2.54-2P plug enables direct connection to control boards
  • 7 inch epoxy probe reaches confined measurement points
  • 30 °C to +105 °C range suits HVAC and industrial use
  • Fast response speed tracks rapid temperature changes

10K NTC Thermistor Probe

This Unique-Bargains temperature sensor is a 10K NTC thermistor probe with a 15.7 inch (40cm) cable and XH2.54-2P connector. The epoxy sensor head operates across a -30°C to +105°C range. It is designed for air conditioner monitoring and general thermal sensing applications.

Suits HVAC and control builds.

The probe fits thermostatic controls, industrial systems, consumer products and thermometers needing a responsive epoxy sensor. Buyers who require a different resistance value, a threaded metal housing, or a calibrated interchangeable element should look at other sensor types.

10K resistance at reference temperature

The single specification that decides fit is the 10K nominal resistance. Your controller or circuit must be designed for a 10K NTC curve; other resistance values will not produce correct readings with this probe.

Highlights

  • 10K NTC thermistor gives precise temperature readings
  • XH2.54-2P plug enables direct connection to control boards
  • 7 inch epoxy probe reaches confined measurement points
  • 30 °C to +105 °C range suits HVAC and industrial use
  • Fast response speed tracks rapid temperature changes

Specifications

BrandUnique Bargains

Questions about this item

How do I connect the XH 2.54 2P plug on this probe to my air-conditioner board?

Align the two-pin connector with the matching header on the control board and press straight in; the keyed housing prevents reverse insertion, which is the step most people get wrong.

What upkeep will this epoxy-sealed sensor need over time?

The sealed head needs no routine maintenance; replace the probe only if readings become erratic or the cable insulation shows damage.

At what temperature does the probe reach its specified operating limit?

The sensor is rated to +105 °C, so sustained exposure above that point is the first limit you will encounter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.