We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two silver metal gas struts with rod and cylinder, 10 inch extended length, 45 lbs force, includes screws and connectors

Unique-Bargains

Unique-Bargains 10in 45Lbs/200N Silver Tone Gas Struts 2pcs

SKU CH-WJ50-E2YGR

Two 10-inch silver-tone gas struts rated at 45 lbs each lift and hold RV, car, boat or bus hatches with included screws and connectors

  • Hands-free opening for heavy lids with 45Lbs/200N force per strut
  • Ready to mount in minutes using included screws and two connector types
  • Fits RV, car, boat and bus applications with universal design
  • Durable metal construction resists wear over repeated cycles
  • Compact 24cm extended length stores neatly when not in use

Universal gas struts for RV, car and boat

This pair of silver-tone gas springs supports medium to heavy lids, hatches and barriers on recreational vehicles, cars, boats and buses. Each strut delivers 45 lbs or 200 N of force to hold panels open hands-free. The set includes two struts, ten screws, two round connectors and two rectangle connectors for a complete installation kit.

Metal construction with mixed connector kit

The struts are built from metal for durability and measure 26 cm total length with a 24 cm extended length and 15 cm compressed length. Housing diameter is 15 mm and rod diameter is 6 mm. Mounting hardware provides both 29 mm round connectors and 51 mm rectangle connectors, plus screws sized for the 10 mm by 6 mm hole pattern.

Check mounting geometry and force requirement

Verify that the 24 cm extended and 15 cm compressed lengths match the travel of your hatch or lid. Confirm the 15 mm housing and 6 mm rod fit the available space and that the 10 mm by 6 mm hole spacing aligns with your existing brackets. Ensure 45 lbs per strut is sufficient for the panel weight you intend to support.

Highlights

  • Hands-free opening for heavy lids with 45Lbs/200N force per strut
  • Ready to mount in minutes using included screws and two connector types
  • Fits RV, car, boat and bus applications with universal design
  • Durable metal construction resists wear over repeated cycles
  • Compact 24cm extended length stores neatly when not in use

Specifications

BrandUnique Bargains

Questions about this item

What force does the 200N gas strut actually hold when the hatch is fully open?

Each strut delivers 45 lbs or 200 newtons of constant force at full extension, rated for medium-to-heavy lids on RVs, cars or boats.

Which mounting holes and brackets match the 10 mm by 6 mm hole pattern on these struts?

The kit includes ten 14 mm screws plus two 29 mm round and two 51 mm rectangular connectors that bolt directly to the 10x6 mm holes.

How do you fit the supplied round and rectangular connectors without stripping the 14 mm screws?

Hand-thread each screw into the 10x6 mm hole first, then tighten gently with a standard screwdriver; the metal brackets align automatically when the rod is fully extended.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.