We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten brass V6 nozzles with 1 mm bore, 1.75 mm filament fit, M6 thread, 12 mm long

Unique-Bargains

Unique-Bargains 1 mm Brass Nozzle V6 1.75 mm Filament 10 pcs

SKU CH-1AXN-WWC84

Pack of ten 1 mm brass V6 nozzles for 1.75 mm filament, stamped for easy identification

  • 10 brass nozzles fit V6 printers with 1.75 mm filament
  • 1 mm nozzle diameter suits broad-extrusion printing tasks
  • Brass construction resists rust for extended service life
  • Stamped size markings allow quick nozzle identification
  • M6 thread with 7 mm length ensures secure hot-end fit

Pack of ten brass V6 nozzles

This set contains ten brass nozzles designed for V6 hot-ends that accept 1.75 mm filament. Each nozzle has a 1 mm orifice and an M6 thread with a 7 mm thread length. The brass construction resists rust and erosion for extended service life.

Brass limits for non-abrasive filaments

Brass nozzles suit non-abrasive materials such as PLA, ABS and PCL. They will wear quickly with filled or abrasive composites, so those filaments are not appropriate. The 1 mm bore also restricts fine-detail printing that smaller diameters would allow.

Check hot-end fit and recalibrate after install

Verify your printer uses a V6 hot-end with M6 threading before ordering. After fitting a new nozzle, the gap between nozzle and build plate must be recalibrated to maintain print quality. A spanner and socket driver are required for the swap.

Highlights

  • 10 brass nozzles fit V6 printers with 1.75 mm filament
  • 1 mm nozzle diameter suits broad-extrusion printing tasks
  • Brass construction resists rust for extended service life
  • Stamped size markings allow quick nozzle identification
  • M6 thread with 7 mm length ensures secure hot-end fit

Specifications

BrandUnique Bargains

Questions about this item

Which nozzle diameter should I choose from this set?

All ten nozzles share the same 1 mm diameter, so there is no alternative size to select within this pack.

What does the 1 mm nozzle diameter mean for my prints?

It extrudes a wider bead than standard 0.4 mm nozzles, allowing faster infill and stronger layers with 1.75 mm PLA or ABS filament.

How does the M6 thread and 7 mm thread length limit compatibility?

The nozzle only fits V6 hot-ends that accept an M6 thread with a 7 mm engagement; other thread pitches or lengths will not seal properly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.