We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Unique-Bargains

Unique-Bargains 1.2mm x 260mm Steel Z Push Rods 10pcs

SKU CH-302R-R9833

Ten stainless-steel Z-bend push rods, 1.2 mm thick and 260 mm long, for RC airplane, boat, car or helicopter control linkages

  • TypeHardware
  • 304 stainless steel resists corrosion
  • 2 mm diameter fits standard control horns
  • 260 mm length suits larger airframes
  • Z head enables quick horn adjustment
  • Pack of 10 rods covers multiple builds

RC control-rod set

This pack contains ten Z-type push-pull rods made from 304 stainless steel. Each rod measures 1.2mm in diameter and 260mm in total length. They are designed for quick adjustment of control horns on RC airplanes, helicopters, boats and cars.

Check control-horn holes and travel

Verify that every control horn on your model accepts a 1.2mm rod and that the 260mm length provides enough throw for the required surface deflection. The Z head needs a hole of at least 1.2mm diameter, and the straight end must reach the servo arm without binding.

Ten identical rods for multi-surface builds

The box supplies ten rods so a single purchase can outfit elevator, rudder, aileron and throttle linkages on one airframe. The black-processed carbon-steel finish resists corrosion, and the Z head inserts directly into the horn for repeatable, tool-free reconnection.

Highlights

  • 304 stainless steel resists corrosion
  • 2 mm diameter fits standard control horns
  • 260 mm length suits larger airframes
  • Z head enables quick horn adjustment
  • Pack of 10 rods covers multiple builds

Specifications

BrandUnique Bargains
TypeHardware
ModelRC Airplane

Questions about this item

What rods are included in the 10-piece pack and does anything else come with them?

The pack contains ten steel Z push rods measuring 1.2 mm in diameter and 260 mm long. No other hardware or accessories are included.

These rods are only listed in one size; how do I know this 1.2 mm diameter and 260 mm length will suit my model?

The rods fit holes of 1.2 mm and above and work with micro servos on RC airplanes, boats, cars and helicopters. The Z head measures 4x4 mm for the control horn.

Once installed, what does the 304 stainless steel material actually give me in use?

The 304 stainless steel provides high hardness and an anti-rust black processed surface. The rods bend easily to the required angle and can be reused repeatedly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.