We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small stainless steel MK10 nozzle with M7 thread and stamped .8 size marking

Unique-Bargains

Unique-Bargains 0.8mm MK10 Stainless Steel Nozzle 1pcs

SKU CH-TS1T-J8NHC

Stainless-steel 0.8 mm nozzle fits MK10 extruders for 1.75 mm filament

  • 8 mm bore extrudes wider layers for faster prints
  • M7 thread fits MK10 extruders without adapters
  • Stainless steel resists wear from abrasive filaments
  • 75 mm filament channel matches standard spools
  • 13 mm length seats cleanly in standard heat blocks

Precision 0.8 mm MK10 nozzle

This stainless-steel nozzle fits MK10 extruders and accepts 1.75 mm filament. The M7 thread and 4 mm thread length match the hot-end specification, while the 0.8 mm orifice prints wider tracks for faster builds. Overall length is 13 mm with a 9 mm diameter. A single piece is supplied.

Users who need strong parts or high throughput

Makers printing PLA, ABS or PCL at standard temperatures will benefit from the larger bore and stainless-steel wear resistance. Builders who need fine detail, tiny text or intricate overhangs should choose a smaller-diameter nozzle instead. The part is not suited for printers that use a different thread pitch or filament size.

Critical spec: 0.8 mm nozzle diameter

This single dimension sets the minimum feature size and maximum volumetric flow rate for the hot-end. If your slicer profiles and design requirements call for a 0.8 mm opening, the nozzle is a direct fit; otherwise a different diameter is required.

Highlights

  • 8 mm bore extrudes wider layers for faster prints
  • M7 thread fits MK10 extruders without adapters
  • Stainless steel resists wear from abrasive filaments
  • 75 mm filament channel matches standard spools
  • 13 mm length seats cleanly in standard heat blocks

Specifications

BrandUnique Bargains

Questions about this item

Will this 0.8mm M7 thread nozzle screw straight onto the MK10 hotend I already have?

Yes, the M7 thread and 4mm thread length are made for the MK10 extruder head, so it fits directly without an adapter.

How can I confirm the 0.8mm stainless steel nozzle is printing correctly after I install it?

Heat the hotend to 180-220 for PLA or 240-280 for ABS, then watch for a steady, even extrusion line and recalibrate the nozzle-to-bed gap before the first print.

Does the package include any tools or extra seals, or just the single nozzle?

Only the 13 x 9 mm stainless steel nozzle is supplied; a spanner and socket screwdriver are needed for fitting and must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.