We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small stainless steel MK8 nozzles with M6 threads and 0.6mm openings

Unique-Bargains

Unique-Bargains 0.6mm MK8 Stainless Steel Nozzle 2pcs 1.75mm

SKU CH-7Q1H-8SMRZ

Two stainless-steel MK8 nozzles with 0.6 mm bore for 1.75 mm filament, M6 thread and 13 × 6 mm size

  • 6mm nozzle diameter prints wider layers faster
  • Stainless steel resists wear from abrasive filaments
  • M6 thread fits MK8 extruder heads directly
  • Two nozzles included for quick replacement
  • 75mm filament compatibility matches common spools

0.6 mm MK8 Stainless Steel Nozzle 2-Pack

Two stainless steel nozzles with a 0.6 mm bore and M6 thread are sized for 1.75 mm filament. The pack suits owners of MK8 hot-ends who want a harder-wearing tip for everyday printing.

Makers printing PLA, ABS or PCL on an MK8 extruder

The stainless construction resists wear better than brass when running standard filaments. Users needing smaller layer heights, abrasive composites or a different thread pattern should select another nozzle.

Stable flow during long prints

The 0.6 mm aperture keeps extrusion steady over extended runs without the rapid heat degradation seen in softer metals. Recalibrate the nozzle-to-bed gap after fitting to maintain first-layer quality.

Highlights

  • 6mm nozzle diameter prints wider layers faster
  • Stainless steel resists wear from abrasive filaments
  • M6 thread fits MK8 extruder heads directly
  • Two nozzles included for quick replacement
  • 75mm filament compatibility matches common spools

Specifications

BrandUnique Bargains

Questions about this item

Does this nozzle require an MK8 hotend with an M6 thread to install?

Yes, the nozzle has an M6 screw thread and 5 mm thread length designed for MK8 extruder heads.

Can I keep using 1.75 mm filament with this 0.6 mm stainless steel nozzle?

Yes, the nozzle accepts 1.75 mm filament through its 2 mm input diameter.

How do I verify the nozzle is printing correctly after fitting it?

Recalibrate the nozzle-to-bed distance, then print a test at 180–220 °C for PLA or 240–280 °C for ABS and check for even extrusion.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.