We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five brass MK10 3D printer nozzles, 0.6 mm bore, 13 mm long, stamped size markings

Unique-Bargains

Unique-Bargains 0.6mm 3D Printer Nozzle MK10 Brass 5pcs

SKU CH-5N0N-FYZB3

Pack of five 0.6 mm brass nozzles for MK10 printers using 1.75 mm filament

  • Compatible with 1.75mm filament MK10 printers
  • Brass construction resists rust for long service life
  • 6mm nozzle diameter extrudes wider layers
  • Stamped size markings simplify identification
  • Five nozzles per pack for spare replacements

Brass MK10 Nozzle 5-Pack

This pack contains five brass nozzles with a 0.6 mm aperture designed for MK10 hot-ends that accept 1.75 mm filament. Each nozzle is stamped with its size for quick identification and features clean M7 threads with a 4 mm thread length. The brass construction resists rust and erosion for extended service life. They suit hobbyists and workshops running standard non-abrasive filaments.

Sustained Extrusion Behaviour

Brass conducts heat quickly, so the nozzle reaches target temperatures of 180 to 220 for PLA or 240 to 280 for ABS and maintains a stable melt zone during long prints. The consistent bore and smooth internal surface reduce friction, helping to prevent pressure build-up that can cause under-extrusion on extended runs. Recalibrating the nozzle-to-bed gap after each swap keeps first-layer adhesion reliable over many hours.

Practical M7 Thread Limits

The M7 thread with 4 mm engagement fits MK10 heat blocks that share this exact specification; printers using different thread pitches or lengths will not accept these nozzles. The 0.6 mm bore balances flow rate and detail for common materials such as PLA, ABS and PCL, but abrasive composites will wear the brass quickly. Users needing finer or coarser extrusion must select a different diameter.

Highlights

  • Compatible with 1.75mm filament MK10 printers
  • Brass construction resists rust for long service life
  • 6mm nozzle diameter extrudes wider layers
  • Stamped size markings simplify identification
  • Five nozzles per pack for spare replacements

Specifications

BrandUnique Bargains

Questions about this item

How much heat does the 0.6mm brass nozzle add during long prints?

The nozzle itself generates no heat; it simply conducts heat from the hot-end. Brass transfers heat quickly, so the hot-end reaches printing temperatures of 180-220 for PLA or 240-280 for ABS efficiently.

What printer parts must I already have to use these MK10 nozzles?

You need a 3D printer with an MK10 hot-end that accepts M7 threads, a 4mm thread length, and a 1.75mm filament path. A spanner and socket screwdriver are also required for installation.

Will the 0.6mm nozzle work with my older MK10 hot-end that has worn threads?

The nozzles have clean, well-formed M7 threads cut to a 4mm length. If the existing heat-block threads are damaged, the new nozzle may not seal properly and could leak filament.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.