We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten white and blue flat ribbon cables 200mm long 16 pin 0.5mm pitch

Unique-Bargains

Unique-Bargains 0.5mm Pitch 16Pin FFC 200mm 10Pcs install accessory

SKU CH-99M1-50SS8

Pack of ten 0.5mm pitch 16-pin flat cables, 200mm long, for dense electronic repairs

  • 5 mm pitch enables high-density connections
  • 16-pin layout matches compatible device headers
  • 200 mm length provides flexible routing space
  • Reinforced ends simplify insertion and add strain relief
  • Pack of 10 cables covers multiple repairs or builds

0.5mm Pitch 16-Pin FFC

This pack contains ten flexible flat cables with a 0.5mm pitch and sixteen conductors. Each cable measures 200mm in length and 8mm in width with a 0.3mm insert thickness. The cables are rated for 60V and 80C and carry a VW-1 flammability rating. They suit repair or prototyping work on laptops, LCD panels, cameras and similar high-density electronics.

Replaces damaged or short internal ribbons

Use these cables when an existing FFC has torn, creased or lost contact in a laptop hinge, display panel or camera module. The stiffened ends ease insertion into low-profile ZIF connectors and provide strain relief at the termination point. The jump is worth it when the original ribbon is no longer available from the device manufacturer and a matching pitch, pin count and length are required.

Limited by fixed 200mm length and 16-pin layout

The 200mm length cannot be trimmed without removing the reinforced ends that enable reliable ZIF seating. The 0.5mm pitch and sixteen conductors fix the connector compatibility; cables with different pin counts or pitches will not mate. The 0.3mm insert thickness suits standard FFC sockets but will not fit connectors designed for thicker FPC variants.

Highlights

  • 5 mm pitch enables high-density connections
  • 16-pin layout matches compatible device headers
  • 200 mm length provides flexible routing space
  • Reinforced ends simplify insertion and add strain relief
  • Pack of 10 cables covers multiple repairs or builds

Specifications

BrandUnique Bargains

Questions about this item

Will the 0.5mm pitch and 16-pin layout match my device's connector?

The cable has a 0.5mm pitch with 16 pins and a 0.3mm insert thickness; verify your connector matches these dimensions exactly.

How do I insert the stiffened ends without damaging the 0.3mm thick contacts?

Align the reinforced stiffener ends straight into the ZIF connector slot, flip the locking bar down gently, and do not force the 0.3mm thick cable at an angle.

When should I replace one of the 10 cables in the pack?

Replace a cable if the white or blue insulation shows creases, the gold contacts oxidise, or the stiffener delaminates after repeated flexing or heat exposure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.