We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five brass V6 nozzles with M6 threads and 0.4mm holes

Unique-Bargains

Unique-Bargains 0.4mm Brass Nozzle V6 M6 1.75mm 5pcs

SKU CH-D4EZ-CJM28

Brass M6 nozzles with 0.4 mm bore for 1.75 mm filament V6 extruders, pack of five

  • 4 mm nozzle gives fine detail with 1.75 mm filament
  • Brass construction suits PLA, ABS and PCL non-abrasive materials
  • M6 thread with 16 mm length fits V6 extruder heads directly
  • Stamped size marking lets you identify the nozzle quickly
  • Pack of five nozzles provides ready spares for maintenance

Brass V6 Nozzle 5-Pack

This set contains five brass nozzles with an M6 thread and a .4 mm aperture, designed for V6-style extruders that accept 1.75 mm filament. They are aimed at hobbyists and small workshops that regularly swap nozzles for routine maintenance or material changes.

Critical Fit: M6 Thread and .4 mm Bore

The single specification that determines compatibility is the M6 screw thread combined with a .4 mm nozzle diameter, matching the V6 heater block and 1.75 mm filament path. Printers using a different thread pitch or bore size will not accept these parts.

Heat-Up Range and Recalibration

Normal printing temperatures span 180 to 220 for PLA and 240 to 280 for ABS, so the brass conducts heat quickly within these bands. After installation the nozzle-to-plate gap must be recalibrated to maintain first-layer quality.

Highlights

  • 4 mm nozzle gives fine detail with 1.75 mm filament
  • Brass construction suits PLA, ABS and PCL non-abrasive materials
  • M6 thread with 16 mm length fits V6 extruder heads directly
  • Stamped size marking lets you identify the nozzle quickly
  • Pack of five nozzles provides ready spares for maintenance

Specifications

BrandUnique Bargains

Questions about this item

What does the 0.4mm nozzle diameter mean for my prints?

The 0.4mm opening is a standard size that balances detail and speed for 1.75mm filament, suitable for everyday PLA, ABS and PCL prints.

How does the M6 thread affect compatibility?

The M6 thread with 16mm length fits V6-style hot ends directly, so it installs into the matching heater block without adapters.

What clearance does the 21mm overall length need?

At 21mm long and 7mm wide, the brass nozzle sits inside a standard V6 heat block, requiring only enough space for a socket wrench during installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.