We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five brass MK10 nozzles 0.4mm M7 thread 13x9mm

Unique-Bargains

Unique-Bargains 0.4mm 3D Printer Nozzle MK10 Brass 5pcs

SKU CH-CX8S-W2KKB

Set of five brass MK10 nozzles with 0.4 mm bore for 1.75 mm filament, M7 thread and 13 x 9 mm size

  • Precise 0.4 mm bore ensures consistent filament flow
  • M7 thread fits MK10 extruders without modification
  • Brass construction handles PLA and ABS at 180–280 °C
  • 75 mm filament input matches standard spools
  • Five-piece pack provides ready spares for quick swaps

Brass nozzles for MK10 extruders

These 0.4 mm brass nozzles fit MK10 extruder heads and accept 1.75 mm filament. The pack contains five pieces, each stamped with its size for quick identification. They are suited for printing non-abrasive materials such as PLA, ABS and PCL. Threads are M7 with a 4 mm thread length.

Check extruder and filament compatibility

Verify that your printer uses an MK10-style hot-end with an M7 thread before ordering. The nozzle input diameter is 4 mm and the filament path is sized for 1.75 mm stock. After installation you must recalibrate the nozzle-to-bed distance to restore print quality.

Heat-block handling and temperature ranges

Replacement requires heating the hot-end to the filament's working temperature — 180–220 °C for PLA or 240–280 °C for ABS — then using a spanner to hold the heat block while unscrewing the old nozzle. The brass body conducts heat rapidly, so avoid contact with the hot block during the swap.

Highlights

  • Precise 0.4 mm bore ensures consistent filament flow
  • M7 thread fits MK10 extruders without modification
  • Brass construction handles PLA and ABS at 180–280 °C
  • 75 mm filament input matches standard spools
  • Five-piece pack provides ready spares for quick swaps

Specifications

BrandUnique Bargains

Questions about this item

Does the pack include any tools or just the five 0.4mm MK10 brass nozzles?

Only the five nozzles are included; a spanner and socket screwdriver are needed for fitting but are not supplied.

Why choose the 0.4mm brass version over a larger or hardened steel option?

The 0.4mm brass tip is the standard size for 1.75mm PLA, ABS and PCL, giving a good balance of detail and flow without the extra cost of hardened steel.

What happens to print quality if I skip the recalibration step after fitting a new nozzle?

The nozzle-to-plate distance will be wrong, causing poor first-layer adhesion, uneven extrusion and failed prints until you re-level the bed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.