We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small brass MK8 nozzles with 0.2mm openings, M6 threads, 13mm long

Unique-Bargains

Unique-Bargains 0.2mm MK8 Brass Nozzle 1.75mm 2pcs

SKU CH-7AA0-NRMZR

Two brass MK8 nozzles with 0.2 mm openings for 1.75 mm filament, supplied as a pair

  • Fine detail prints with 0.2 mm nozzle diameter
  • Brass construction resists rust for long service life
  • MK8 compatibility fits 1.75 mm filament printers
  • Stamped size marking allows quick nozzle identification
  • Precise machining gives clean threads and consistent hole size

Brass MK8 Nozzle for 1.75 mm Filament

Two 0.2 mm brass nozzles designed for MK8 hot-ends that accept 1.75 mm filament. The M6 thread and 5 mm thread length match standard MK8 heater blocks. Brass construction resists corrosion and suits non-abrasive materials such as PLA, ABS and PCL. Stamped size markings simplify identification during maintenance.

0.2 mm Orifice Diameter

The 0.2 mm nozzle aperture determines the finest detail and layer resolution achievable on compatible printers. This diameter suits high-detail models and thin-wall prints where a larger opening would extrude too much material. Buyers who need faster print speeds or stronger layers should consider a larger nozzle size not offered in this pack.

Thermal Behaviour and Power

Brass conducts heat quickly, so the nozzle reaches PLA temperatures of 180 to 220 degrees and ABS temperatures of 240 to 280 degrees with minimal lag. The small 0.2 mm bore increases back-pressure, which may raise extruder motor current slightly during fast moves. No active cooling or fan specification is provided for the nozzle itself.

Highlights

  • Fine detail prints with 0.2 mm nozzle diameter
  • Brass construction resists rust for long service life
  • MK8 compatibility fits 1.75 mm filament printers
  • Stamped size marking allows quick nozzle identification
  • Precise machining gives clean threads and consistent hole size

Specifications

BrandUnique Bargains

Questions about this item

What does the 0.2 mm nozzle diameter mean for layer detail and print speed?

The 0.2 mm opening produces finer layers and sharper corners, but extrusion is slower and more prone to clogging with filled filaments.

How does the M6 thread with 5 mm length affect which hot-ends accept this nozzle?

It fits MK8-style heater blocks that use an M6×5 mm thread; the block must be held with a spanner while tightening.

Will the 13 mm overall length and 6 mm diameter clear my printer's fan shroud or silicone sock?

The nozzle measures 13 mm long by 6 mm wide, so check your shroud or sock clearance before installing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.