We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small brass V6 nozzles with 0.2mm holes and M6 threads

Unique-Bargains

Unique-Bargains 0.2mm Brass V6 Nozzle 1.75mm 2pcs

SKU CH-J4CP-0D8BT

Two brass V6 nozzles with 0.2mm openings for 1.75mm filament, stamped for easy identification and machined with clean threads

  • Precise 0.2 mm nozzle diameter enables fine-detail prints
  • Brass construction resists rust and erosion for long service life
  • M6 thread with 7 mm length fits V6 hot-ends directly
  • Two nozzles per pack provides a ready spare for quick changes
  • Smooth internal surface and clean threads ensure consistent filament flow

V6 Brass Nozzle 0.2mm for 1.75mm Filament

This brass nozzle fits V6 hotends and accepts 1.75mm filament. The 0.2mm orifice suits detailed prints with non-abrasive materials such as PLA, ABS and PCL. Two pieces are included so a spare is on hand. Stamped sizing helps quick identification during maintenance.

Upgrade from wider stock nozzles

Replacing a standard 0.4mm tip with this 0.2mm version sharpens fine features and improves layer definition. The jump is worthwhile when models demand thin walls, small text or intricate geometry. Users printing large structural parts at high speed will not benefit from the smaller aperture.

Handles fine detail, limits flow rate

The narrow bore extrudes thin strands cleanly for high-resolution work. Brass construction resists corrosion and provides a long service life with standard filaments. Maximum volumetric throughput is lower than larger nozzles, so print times increase for bulky objects. Abrasive composites will wear the soft brass quickly.

Highlights

  • Precise 0.2 mm nozzle diameter enables fine-detail prints
  • Brass construction resists rust and erosion for long service life
  • M6 thread with 7 mm length fits V6 hot-ends directly
  • Two nozzles per pack provides a ready spare for quick changes
  • Smooth internal surface and clean threads ensure consistent filament flow

Specifications

BrandUnique Bargains

Questions about this item

Will the M6 thread with 7 mm length fit my V6 hotend?

Yes, the nozzle has an M6 thread and 7 mm thread length made for V6 hotends.

What tool sizes do I need and what step is often missed?

Use a spanner on the heat block and a socket driver; the step many miss is reheating to 180‑220 °C for PLA or 240‑280 °C for ABS before tightening.

How often should I swap these brass nozzles when printing PLA?

Brass wears faster with abrasive filaments; for PLA expect several hundred printing hours before replacement is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.