We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten small brass V6 nozzles with M6 threads and 0.25mm openings

Unique-Bargains

Unique-Bargains 0.25mm V6 Brass Nozzle 1.75mm 10pcs

SKU CH-GW8A-7HJY2

Pack of ten 0.25 mm brass nozzles with M6 thread for 1.75 mm filament V6 extruders

  • Fine-detail prints with 0.25 mm brass nozzle
  • Ten nozzles included for extended printing sessions
  • Direct fit for V6 extruders using 1.75 mm filament
  • Clean M6 threads ensure quick, reliable nozzle swaps
  • Brass construction suited for PLA, ABS and PCL filaments

Brass V6 nozzle 0.25 mm for 1.75 mm filament

Ten brass nozzles with a 0.25 mm bore and M6 thread fit V6-style hot-ends that accept 1.75 mm filament. Each nozzle measures 12 mm long by 7 mm across the flats. The pack suits owners of compatible 3D printers who need a ready supply of fine-detail tips.

Fits V6 hot-ends using M6 thread

The nozzles screw directly into a V6 heat block with an M6 thread length of 7 mm and a 2 mm input diameter. No adapter or different thread pitch is required. Swapping a worn tip restores consistent extrusion without changing the heater cartridge or thermistor.

Brass suits non-abrasive filaments

Brass construction is intended for PLA, ABS, PCL and similar non-abrasive materials at typical print temperatures of 180 to 220 °C for PLA and 240 to 280 °C for ABS. Recalibrate the nozzle-to-bed gap after each change to maintain first-layer quality.

Highlights

  • Fine-detail prints with 0.25 mm brass nozzle
  • Ten nozzles included for extended printing sessions
  • Direct fit for V6 extruders using 1.75 mm filament
  • Clean M6 threads ensure quick, reliable nozzle swaps
  • Brass construction suited for PLA, ABS and PCL filaments

Specifications

BrandUnique Bargains

Questions about this item

How many nozzles come in the pack so I know when I'll run out during long print runs?

The pack contains 10 brass nozzles, each with a 0.25mm orifice and M6 thread for V6 extruders.

Will the brass nozzles handle the heat from printing ABS all day without degrading?

Brass conducts heat well for PLA at 180-220°C and ABS at 240-280°C, but abrasive filaments will wear the 0.25mm hole faster.

What tools do I need to have on hand before I can swap one of these nozzles in?

You need a spanner to hold the heat block and a socket screwdriver that fits the M6 thread on the 12 x 7 mm nozzle body.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.