We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small brass V6 nozzles with M6 threads and 0.25mm tips

Unique-Bargains

Unique-Bargains 0.25mm 3D Printer Nozzle Brass V6 1.75mm 2pcs

SKU CH-HKP1-SY9QV

Two brass V6 nozzles with 0.25 mm bore for 1.75 mm filament, M6 thread

  • Fine 0.25 mm nozzle for detailed prints
  • Brass construction suits PLA, ABS and PCL filaments
  • M6 thread with 7 mm length fits V6 extruders
  • 2 mm input bore matches 1.75 mm filament
  • Two nozzles per pack for quick replacement

0.25 mm Brass V6 Nozzle

Two brass nozzles with a 0.25 mm orifice and M6 thread for V6 extruder heads. They accept 1.75 mm filament and measure 12 x 7 mm overall. Designed for non-abrasive materials such as PLA, ABS and PCL.

Check V6 fit and filament size

Verify that your printer uses a V6-style hot-end with an M6 thread and 7 mm thread length. Confirm the filament path is sized for 1.75 mm stock. Stamped size on each nozzle helps identify the 0.25 mm bore before installation.

Swap nozzle and recalibrate

Heat the hot-end to the material range, hold the heater block with a spanner and exchange the nozzle using a socket driver. After fitting, recalibrate the nozzle-to-bed distance to restore first-layer quality. Pack contains two nozzles for a spare or quick change.

Highlights

  • Fine 0.25 mm nozzle for detailed prints
  • Brass construction suits PLA, ABS and PCL filaments
  • M6 thread with 7 mm length fits V6 extruders
  • 2 mm input bore matches 1.75 mm filament
  • Two nozzles per pack for quick replacement

Specifications

BrandUnique Bargains

Questions about this item

What comes in the package and what extra tools are needed to install the nozzles?

The package contains two brass nozzles stamped with their 0.25 mm size. Installation requires a spanner to hold the heat block and a socket screwdriver; these tools are not included.

How do I decide between the available nozzle diameters for my V6 extruder?

This listing supplies only the 0.25 mm diameter version, which is suited for fine-detail prints with 1.75 mm PLA, ABS or PCL filaments. Choose a different diameter if you need faster printing or stronger layers.

What print quality can I expect from the 0.25 mm brass nozzle once fitted?

The 0.25 mm bore produces finer detail than larger nozzles, but extrudes less material per second. Print at 180–220 °C for PLA or 240–280 °C for ABS and recalibrate the nozzle-to-bed gap after fitting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.